MEGA series Star Lab machines

Star-Lab plasma table discussion forum
Post Reply
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

MEGA series Star Lab machines

Post by BTA Plasma »

We are proud to announce the Mega line of Star Lab machines. This particular one is a 75.5"x289" travel machine. Enough acceleration to cut 26ga steel at book speeds but enough mass to support six inches of steel 72x288. Twin USA made large inside heavy duty cable chain carrier on both sides. 5x5 Boxed square tubing and a 55 degree angled oversized water bed. This is a massive machine.

Image
User avatar
Unvevo
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 85
Joined: Wed Jun 29, 2016 4:42 pm

Re: MEGA series Star Lab machines

Post by Unvevo »

Wow that's huge!
BTA Plasma
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 590
Joined: Thu May 12, 2011 4:28 pm

Re: MEGA series Star Lab machines

Post by BTA Plasma »

The machine in the picture is set up with a Hypertherm Max Pro 200 and slat spacing as tight as 2.25. The greyish-white in the water bed is powder coat primer.
Post Reply

Return to “Star-Lab CNC Forum”