Flaming Mahi Bench
- LMRaven
- 1/2 Star Member
- Posts: 2
- Joined: Tue Mar 01, 2016 10:48 am
- Contact:
Flaming Mahi Bench
Wanted to Share a bench I just built. Stainless Mahi inlay in back. Laminated steel and wood legs
Burn hot, Burn long, and pray to Surtr that all drops, drop straight.
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: Flaming Mahi Bench
Beautiful
-
- 3 Star Member
- Posts: 329
- Joined: Thu Mar 08, 2012 9:41 am
- Location: Hickson Ontario Canada
- Contact:
-
- 3 Star Elite Contributing Member
- Posts: 411
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Flaming Mahi Bench
Nice work!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Flaming Mahi Bench
well done! Show us your setup that enables you to build such a cool piece. Nice first post!
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Flaming Mahi Bench
Very nice. Is the fish actually inlayed into the wood or just placed on top of it. If inlayed what was your process? I would guess cut fish, trace on wood and then route it out. Like Capstone said, NICE FIRST POST!
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 1/2 Star Member
- Posts: 1
- Joined: Sat Mar 05, 2016 11:43 pm
Re: Flaming Mahi Bench
Nice bench
-
- 4 Star Elite Contributing Member
- Posts: 996
- Joined: Thu Nov 21, 2013 5:32 pm
Re: Flaming Mahi Bench
great work.....love the combination and wood and stainless
- LMRaven
- 1/2 Star Member
- Posts: 2
- Joined: Tue Mar 01, 2016 10:48 am
- Contact:
Re: Flaming Mahi Bench
Very nice. Is the fish actually inlayed into the wood or just placed on top of it. If inlayed what was your process? I would guess cut fish, trace on wood and then route it out. Like Capstone said, NICE FIRST POST!
The Mahi is full inlay. Designed fish in Flexisign, then saved as DXF to work on it in Vector 9.4. Had buddy with large 10x20 Plasma cut stainless. verified size, did a small offset. Cut inlay on my 4x8 Shopbot PRT Alpha with 6.6HP HSD spindle and tool change. Sandblasted back of stainless to rough it. Used Original Gorilla glue, wetting both surfaces as specified in instructions. Clamped with another piece steel to ensure it would be flat. Sanded smooth and coated with polyurethane.
The Mahi is full inlay. Designed fish in Flexisign, then saved as DXF to work on it in Vector 9.4. Had buddy with large 10x20 Plasma cut stainless. verified size, did a small offset. Cut inlay on my 4x8 Shopbot PRT Alpha with 6.6HP HSD spindle and tool change. Sandblasted back of stainless to rough it. Used Original Gorilla glue, wetting both surfaces as specified in instructions. Clamped with another piece steel to ensure it would be flat. Sanded smooth and coated with polyurethane.
Burn hot, Burn long, and pray to Surtr that all drops, drop straight.
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Flaming Mahi Bench
Thanks LMRaven
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- kgc1031
- 2.5 Star Member
- Posts: 217
- Joined: Tue Apr 15, 2014 7:58 pm
Re: Flaming Mahi Bench
Can you share the dxf file of the fish. nice job!
-
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: Flaming Mahi Bench
Where's the file?
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
- kgc1031
- 2.5 Star Member
- Posts: 217
- Joined: Tue Apr 15, 2014 7:58 pm
Re: Flaming Mahi Bench
will you share the dxf file of the fish? Please! I love it