A friend of mine who was burned in an accident asked if I would make him a sign for the end of his drive.He wanted a wood sign with his dear 65 ford on it. I showed him car after car but no 65.
I posted for help and Brian Mick was so kind to draw his beloved 65 from a picture. Thanks again Brian.
Sign is wood and car is metal and raised about 1/2 inch off back.
Wood - Metal Sign
- captdick
- 2 Star Elite Contributing Member
- Posts: 68
- Joined: Mon Dec 21, 2009 11:13 am
- Location: Lodi, Wisconsin
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Wood - Metal Sign
Nice job Dick!! Been spending some time in the Garage Mahal I see.
If you get in the area, give me a call.
If you get in the area, give me a call.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2648
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Wood - Metal Sign
Nice looking sign.
Larry
Larry
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Wood - Metal Sign
Very nice & "clean looking".
First class . . .
Steve
First class . . .
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
- 2.5 Star Member
- Posts: 138
- Joined: Mon Feb 07, 2011 11:27 am
Re: Wood - Metal Sign
Looks good.
How did you attach the metal to the wood?
How did you attach the metal to the wood?
- captdick
- 2 Star Elite Contributing Member
- Posts: 68
- Joined: Mon Dec 21, 2009 11:13 am
- Location: Lodi, Wisconsin
Re: Wood - Metal Sign
Welded two bolts to back of car before powdercoat.
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Wood - Metal Sign
Love it!
- BrianMick
- 4 Star Elite Contributing Member
- Posts: 999
- Joined: Sun Dec 06, 2009 8:00 am
- Location: St. Cloud,Minnesota United States of America
- Contact:
Re: Wood - Metal Sign
Great job, I love the combination of wood and metal.
Brian
Brian
BrianMick
www.midwayiron.com
www.midwayiron.com
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact: