Steampunk
-
CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Steampunk
Nice looking . . . out the box creative . . . now if only I could get some "creativity" going . . . 
Steve
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
34chev
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Re: Steampunk
We want to get some old looking clock face and parts to make one a working clock. Next project
-
michmetalman
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Steampunk
Very cool. Steampunk is hot right now!
-
grindergary
- 3.5 Star Elite Contributing Member
- Posts: 623
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
Re: Steampunk
Very nice job. Looks fantastic!
Gary
Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
-
B Holmes
- 2 Star Member
- Posts: 85
- Joined: Mon Aug 06, 2012 9:29 pm
Re: Steampunk
I really like that.
5 x 10 Air bladder water table
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
-
abmetal
- 4 Star Elite Contributing Member
- Posts: 798
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: Steampunk
I LIKE IT!!
Allen
Allen
-
hoppy81
- 1/2 Star Member
- Posts: 3
- Joined: Sat Nov 01, 2014 9:18 pm
- Location: Sandy, Utah
-
Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: Steampunk
Very Cool! I think it would look look killer with some copper coating and rusted parts too!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
