Another Tree of Life
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Another Tree of Life
3' round, airbrushed with Bill's dyes. Pic is in failing light, this thing POPS in the sun.
Question is...what do I ask for it? ($$?)
Question is...what do I ask for it? ($$?)
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Another Tree of Life
that be fine looking work you did. Thanks for posting.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Another Tree of Life
Very nice indeed . . .
Steve
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
- 3 Star Member
- Posts: 273
- Joined: Sat Oct 06, 2012 7:16 pm
Re: Another Tree of Life
Very nice!!!! Are the dyes suitable for outdoor use?
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Re: Another Tree of Life
Thanks guys! Was curious about the pricing as I had several passerbys want to pay $100-125 for it. Thought that was way low. I was asking $300 and my wife says THAT is way low I may just keep it I like it so much!
-
- 3.5 Star Elite Contributing Member
- Posts: 623
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
Re: Another Tree of Life
Very nice work.
I think you should get way more than $300.00 for that piece. I am guessing but I would say you would be closer to $500.00for that one.
Awesome work.
thanks for posting.
Gary
Talked to a friend who does the interior of show homes and she said you would be looking at a start of $600.00 for that one here.
Gary
I think you should get way more than $300.00 for that piece. I am guessing but I would say you would be closer to $500.00for that one.
Awesome work.
thanks for posting.
Gary
Talked to a friend who does the interior of show homes and she said you would be looking at a start of $600.00 for that one here.
Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
- chasxjs
- 2.5 Star Elite Contributing Member
- Posts: 225
- Joined: Sun Aug 24, 2014 10:50 pm
- Location: Lake Havasu City, Arizona
Re: Another Tree of Life
Great job.
Last edited by chasxjs on Sun Nov 02, 2014 10:58 am, edited 1 time in total.
Charles
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
____________________
DIY 5x5 Folding Plasma Table
Hypertherm PM45
Lagun 4 axis CNC Mill
Shopsmith Lathe
Multiple saws, welders, etc.
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Another Tree of Life
You can ask anything you want! Let us know what it sells for.
What gauge did you cut it out of?
What gauge did you cut it out of?
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Re: Another Tree of Life
18 guage steel. Airbrushed it and then shot it with clear. The clear came out near flawless...has a few very minor spots that no one would ever see (speck of dust here, a touch of orange peel there...maybe 3 total defects). I will probably get them out this week.
I'd love to get a roller and make a hoop to mount it in (out of square tube).
Thanks guys!
I'd love to get a roller and make a hoop to mount it in (out of square tube).
Thanks guys!
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: Another Tree of Life
This is one I did for a charity event. It is 36" plus the 1" hammered edge tubing and I put an asking price of $400; which it sold for $600. Same piece in both pics. Color is via torch aside from black paint for the silhouette of the child.
.02
.02
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Re: Another Tree of Life
I like that a lot Travis, thanks for sharing!
Did you use a tubing roller to do that?
Did you use a tubing roller to do that?
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: Another Tree of Life
Thank you and no problemo. Yes, the ring was done via tubing roller.Cracker Red wrote:I like that a lot Travis, thanks for sharing!
Did you use a tubing roller to do that?
-
- 3.5 Star Elite Contributing Member
- Posts: 689
- Joined: Fri Aug 15, 2008 6:22 pm
- Location: Tenino,WA
Re: Another Tree of Life
Was King Architectural your tubing source?
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: Another Tree of Life
Local steel yard carries it actually!plain ol Bill wrote:Was King Architectural your tubing source?
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: Another Tree of Life
I guess it all depends on your market, or where you get exposure.... This is a version that I do... I sold this one for $375 but that was for a really good steady customer. I've had another one like it on display at the gallery for 3 weeks at $325 and a little interest, but no sale... sometimes they go fast, sometimes they sit.... But don't "give" your work away... once you do and word gets out people will be grinding on you for lower prices like it's a yard sale!
One thing I do notice on this design, if you look on Etsy and Ebay, it's everywhere! You can get them as low as $50 and up depending on the finish, but the online market is pretty saturated with them. Adding a frame or a backer will take it up a notch and give you an advantage on or off line!
Oldsarge
One thing I do notice on this design, if you look on Etsy and Ebay, it's everywhere! You can get them as low as $50 and up depending on the finish, but the online market is pretty saturated with them. Adding a frame or a backer will take it up a notch and give you an advantage on or off line!
Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Another Tree of Life
Interesting addition of the leaf and wire frame you artsy guy know how to make thing POP.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Another Tree of Life
That is amazing! How in the hell do you get the colors so bright? I tried the dyes and could barely see them..so I gave up...lol
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: Another Tree of Life
I thought the same thing when I first used them... Until I sprayed them with clear coat! Then the color really "popped!" Especially in the sun light!michmetalman wrote:That is amazing! How in the hell do you get the colors so bright? I tried the dyes and could barely see them..so I gave up...lol
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: Another Tree of Life
GoingCustom wrote:I thought the same thing when I first used them... Until I sprayed them with clear coat! Then the color really "popped!" Especially in the sun light!michmetalman wrote:That is amazing! How in the hell do you get the colors so bright? I tried the dyes and could barely see them..so I gave up...lol
And if you airbrush you have to lay it on fairly heavy, if you powdercoat or clearcut it really makes the colors pop!
Mike
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Re: Another Tree of Life
Sold for $495
Not sure what size you made there Sarge, but I don't see how you can make money @ 375 with that. Looks like it took HOURS to make!
Not sure what size you made there Sarge, but I don't see how you can make money @ 375 with that. Looks like it took HOURS to make!
-
- 2.5 Star Member
- Posts: 150
- Joined: Mon Mar 18, 2013 4:40 am
Re: Another Tree of Life
Those tree of life are nice people think I crazy when I ask $70 for the tree of life that I make and I use a wine Barral ring
- CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Another Tree of Life
Looks great, surely worth it . . .Cracker Red wrote:Sold for $495
Not sure what size you made there Sarge, but I don't see how you can make money @ 375 with that. Looks like it took HOURS to make!
Have to ask, what part of the country are you in?
I don't think you would never get that here in Louisiana.
Or did you sell on the internet?
Just trying to learn, it is all coming together slowly . . .
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Re: Another Tree of Life
I'm in Florida. I do this as a side thing, but refuse to give my work away. I'm blessed that I don't have to sell much of anything, just a few $$$ here and there to help pay for the machine.
I'd rather make 3 items that sell for 500 each per month, than 50 that sell for 10. Maybe I'm lazy ?
I'd rather make 3 items that sell for 500 each per month, than 50 that sell for 10. Maybe I'm lazy ?
-
- 2.5 Star Member
- Posts: 155
- Joined: Sat May 03, 2014 3:24 pm
Re: Another Tree of Life
That is awesome as well!modnoc13 wrote:Those tree of life are nice people think I crazy when I ask $70 for the tree of life that I make and I use a wine Barral ring
My steel supplier has the hammered edge tube but in 1 and 3/16". I have a 1.25" square die set..... I'm hoping that this would work as the HE tube looks so good!