Made this frame for a leaded glass piece that used to be in our kitchen cabinets. The art was made by a friends dad in 1989 and I am framing it to give to him as a gift, his father passed on last year. There were three pieces originally and I only used two when we remodeled the kitchen.
Made from 1x3 tubing, because apparently 1/2x3 or 1/2 by anything is not available.
Industrial Frame
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Industrial Frame
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: Industrial Frame
Awesome! Any plans to back light it? I like the heavy industrial look, it contrasts the delicateness of the flower.... Well done!
Mike
Mike
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Industrial Frame
I tried backlighting but did not Ike the effect. The light wasn't diffused enough.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com