Quick Cut from 1/4" Plate
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Quick Cut from 1/4" Plate
I cut this yesterday for a guy who made a donation for my dogs surgery(I don't feel so bad if I give something in return). Used a piece of scrap 1/4" plate laying around. The cuts on 1/4" are amazing to me, little to no dross and square cuts. Now I have to tune in 1/2" plate.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Quick Cut from 1/4" Plate
That looks great, Dennis.
There is something about 'giving' that is good for the soul.
Looks like both of you win!
There is something about 'giving' that is good for the soul.
Looks like both of you win!
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday