Jeep Grill Firepit

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
thissideup
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sun Nov 20, 2011 12:19 am

Jeep Grill Firepit

Post by thissideup »

Did some more work on my Jeep Grill fire pit today, added legs, a floor and a cooking grill.
Attachments
IMG_4856.JPG
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Jeep Grill Firepit

Post by little blue choo »

Awesome!
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Corfabrication
2.5 Star Member
2.5 Star Member
Posts: 148
Joined: Mon Nov 03, 2014 2:04 pm
Location: Racine Wi
Contact:

Re: Jeep Grill Firepit

Post by Corfabrication »

Looks nice
Mtw fdu
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 269
Joined: Sat Dec 20, 2014 3:12 am
Location: Barossa Valley, South Australia

Re: Jeep Grill Firepit

Post by Mtw fdu »

Have you got the dxf file to share please?

Thank you kindly.

Mtw fdu.
Camcutcnc 4 x 4 plasma cutter with UC 100 Motion Controller
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis
Laser cross hairs
starr_motorsports
1 Star Member
1 Star Member
Posts: 19
Joined: Tue Nov 05, 2013 4:56 am

Re: Jeep Grill Firepit

Post by starr_motorsports »

Mtw fdu wrote:Have you got the dxf file to share please?

Thank you kindly.

Mtw fdu.
That is the question
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: Jeep Grill Firepit

Post by muzza »

starr_motorsports wrote:
Mtw fdu wrote:Have you got the dxf file to share please?

Thank you kindly.

Mtw fdu.
That is the question

This is the "Project Picture Gallery" and not the sharing forum. I know numerous members who no longer post their pics here due to the responses they got when they were unwilling to share the file they showed a pic of. If you take a look at the pic it's a pretty simple one to draw up if you really want one.

Scott who posted this makes his living out of selling firepits (as shown in his signature). I don't think coca-cola would be where they are if they gave out their recipe ;)

I'll also add that what is without doubt the most widely downloaded (1279 downloads) and made firepit from here is one that Scott did share a while back.
Murray
thissideup
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sun Nov 20, 2011 12:19 am

Re: Jeep Grill Firepit

Post by thissideup »

Mtw fdu wrote:Have you got the dxf file to share please?

Thank you kindly.

Mtw fdu.
Ill share it in a couple of days, I was building as i go and didn't think to save the original file, only the cut path, Ill see if I can put to back together before I share it.
liftedon37s
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Wed May 07, 2014 12:42 am

Re: Jeep Grill Firepit

Post by liftedon37s »

This fire pit is sweet. I like that it folds up,
Mtw fdu
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 269
Joined: Sat Dec 20, 2014 3:12 am
Location: Barossa Valley, South Australia

Re: Jeep Grill Firepit

Post by Mtw fdu »

thissideup wrote:
Mtw fdu wrote:Have you got the dxf file to share please?

Thank you kindly.

Mtw fdu.
Ill share it in a couple of days, I was building as i go and didn't think to save the original file, only the cut path, Ill see if I can put to back together before I share it.
Thank you thissideup.

Mtw fdu.
Camcutcnc 4 x 4 plasma cutter with UC 100 Motion Controller
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis
Laser cross hairs
RockRanger
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Thu Dec 22, 2011 7:45 pm

Re: Jeep Grill Firepit

Post by RockRanger »

How thick of materiel are you using on the fire pit?
User avatar
Peechy
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 337
Joined: Tue Nov 11, 2014 9:12 pm
Contact:

Re: Jeep Grill Firepit

Post by Peechy »

Yup nice fire pit b whole lot easier to get the file too .. easy done make it myself
8-)
thissideup
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sun Nov 20, 2011 12:19 am

Re: Jeep Grill Firepit

Post by thissideup »

Peechy wrote:Yup nice fire pit b whole lot easier to get the file too .. easy done make it myself
I'll see if I can get it posted tomorrow,
User avatar
Peechy
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 337
Joined: Tue Nov 11, 2014 9:12 pm
Contact:

Re: Jeep Grill Firepit

Post by Peechy »

Thanks my buddy hahahah yah right ! Still no file hmmmm ? lol
8-)
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”