10 Years ago when I first started!
-
- 2.5 Star Member
- Posts: 142
- Joined: Wed Jun 18, 2014 11:06 am
- Location: Newberry SC
- Contact:
10 Years ago when I first started!
I bought my first welder Hobart 180 and a 5' x 10' plasma table. Never welded anything in my life nor have I ever seen or watched a CNC plasma cutter ever work. Never had seen a plasma torch for that matter. This was my very first piece I ever cut and my first attempt at welding and grinding in my life. As you can see from my website, practice makes perfect. Just thought I would post this for those who are just getting started. Best regards, John http://www.plasmadesigns.info is my site.
-
- 2.5 Star Elite Contributing Member
- Posts: 215
- Joined: Thu Jul 18, 2013 3:05 pm
Re: 10 Years ago when I first started!
You have come along way. I hope to be able to stop by your store next time I come through that area, it looks impressive.
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1234
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: 10 Years ago when I first started!
You've certainly come a very long way through the years. Practice does make perfect, and your website is full of fine examples. You do excellent work, you should be very proud.
Ben
Ben
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 10 Years ago when I first started!
Well at the rate your going you may as well make a career out of it. Just kidding great looking work.
I love the freaky fish on the home page makes me smile thanks.
Have fun
Tom
I love the freaky fish on the home page makes me smile thanks.
Have fun
Tom
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT