Mechanical pointer for hypertherm duramax torch

KM Koncepts · Post by **KM Koncepts** » Sat Jan 21, 2017 4:00 pm

I've designed a drop in Billet Aluminum mechanical pointer that can be used to precisely locate a datum point on any table using a hypertherm torch. We designed in house and this has allowed my company with repeatability, which makes for precise parts and happy customers. This can be dropped into machine torches and hand held torches. This is precisely machined and MADE IN THE U.S.A. I've used this to locate off a center of a bolt to accurately locate my cut area when I have a part that is bigger than my table. It can also be used to precisely locate if you are having to move a sheet and pick up from where you left off. These are available on my site http://www.kmwfabrication.com/shop . I have some others being designed and tested for other commonly used plasma units. All feedback will be greatly appreciated and I hope I can pass on the accuracy that has helped me grow as a business to others like me.

Brand X · Post by **Brand X** » Sat Jan 21, 2017 4:18 pm

Here is some feedback.

Just noticed it today.. Good idea just the same..

https://www.hypertherm.com/en-US/hypert ... ach-tools/

KM Koncepts · Post by **KM Koncepts** » Sat Jan 21, 2017 4:24 pm

Lol yeah I didn't know they had one already. When I asked my local rep if they had anything of the sort I was told no and designed this one up. On the forums I could only find the laser attachments from a drill press nothing mechanical.

Brand X · Post by **Brand X** » Sat Jan 21, 2017 4:37 pm

Make them for Victor machines. I would buy one.:)Designed around the 9-8218 cup..

KM Koncepts · Post by **KM Koncepts** » Sat Jan 21, 2017 4:40 pm

Brand X wrote:Make them for Victor machines. I would buy one.:)Designed around the 9-8218 cup..

Email me model # etc. Kmwfabrication@gmail.com

ovrrdrive · Post by **ovrrdrive** » Sat Jan 21, 2017 4:42 pm

The one from Hypertherm is $112 at Bakers... If this was cheap I might buy one too.

KM Koncepts · Post by **KM Koncepts** » Sat Jan 21, 2017 4:44 pm

ovrrdrive wrote:The one from Hypertherm is $112 at Bakers... If this was cheap I might buy one too.

Mine are $25 on my site.

Brand X · Post by **Brand X** » Sat Jan 21, 2017 5:05 pm

For the SL-100 torch, and 9-8218 exposed tip cup.. Pretty much all Thermal dynamics/Victors use that torch for 13/14 years..

KM Koncepts · Post by **KM Koncepts** » Sat Jan 21, 2017 5:15 pm

Brand X wrote:For the SL-100 torch, and 9-8218 exposed tip cup.. Pretty much all Thermal dynamics/Victors use that torch for 13/14 years..

I'll get working on it.

Brand X · Post by **Brand X** » Sat Jan 21, 2017 5:44 pm

Cool..
There are a few of those out there too..

I could send you a cup, and tip for something to pattern it off of..They have a shielded cup too. 9-8237.. It could give you some options on how you build it.. Half the people use exposed, and the other half use shielded. Most will have a Unshielded cup laying around.. I use both, so not sure where I fit in..

KM Koncepts · Post by **KM Koncepts** » Sat Jan 21, 2017 6:05 pm

Brand X wrote:Cool..
There are a few of those out there too..

I could send you a cup, and tip for something to pattern it off of..They have a shielded cup too. 9-8237.. It could give you some options on how you build it.. Half the people use exposed, and the other half use shielded. Most will have a Unshielded cup laying around.. I use both, so not sure where I fit in..

Shoot me an email. I'd appreciate that. Kmwfabrication@gmail.com

ovrrdrive · Post by **ovrrdrive** » Sat Jan 21, 2017 8:08 pm

KM Koncepts wrote:
ovrrdrive wrote:The one from Hypertherm is $112 at Bakers... If this was cheap I might buy one too.

Mine are $25 on my site.

I think that's pretty fair. Look for an order from me in a few weeks.

KM Koncepts · Post by **KM Koncepts** » Sat Jan 21, 2017 8:18 pm

ovrrdrive wrote:
KM Koncepts wrote:
ovrrdrive wrote:The one from Hypertherm is $112 at Bakers... If this was cheap I might buy one too.

Mine are $25 on my site.
I think that's pretty fair. Look for an order from me in a few weeks.

Thank You! Look forward to it. I try to keep the price reasonable. It's not a wear item but if for some reason one was to be damaged or lost its not gonna break the bank to replace it.

thatboystevo · Post by **thatboystevo** » Mon Jan 23, 2017 2:29 pm

This will work a lot better than a nail like I use lol

KM Koncepts · Post by **KM Koncepts** » Mon Jan 23, 2017 4:12 pm

thatboystevo wrote:This will work a lot better than a nail like I use lol

LOL that's how it started for me a piece of tig filler Rod. It worked but needed to get more precise.

motoguy · Post by **motoguy** » Mon Jan 23, 2017 8:01 pm

KM Koncepts wrote:
thatboystevo wrote:This will work a lot better than a nail like I use lol

LOL that's how it started for me a piece of tig filler Rod. It worked but needed to get more precise.

I planned on doing the same, but decided to skip that step entirely. I received email confirmation that mine shipped today. Thanks!

KM Koncepts · Post by **KM Koncepts** » Tue Jan 24, 2017 12:00 am

motoguy wrote:
KM Koncepts wrote:
thatboystevo wrote:This will work a lot better than a nail like I use lol

LOL that's how it started for me a piece of tig filler Rod. It worked but needed to get more precise.
I planned on doing the same, but decided to skip that step entirely. I received email confirmation that mine shipped today. Thanks!

Thank you for your business, I hope you like it and it works well for you.

Brand X · Post by **Brand X** » Tue Jan 24, 2017 12:41 am

Got those other parts in the mail today, and hopefully you can help out the Thermal/esab guys too..

KM Koncepts · Post by **KM Koncepts** » Tue Jan 24, 2017 2:27 am

Brand X wrote:Got those other parts in the mail today, and hopefully you can help out the Thermal/esab guys too..

Thank you I will get started on that as soon as I get the parts.

Nacs Fab · Post by **Nacs Fab** » Thu Jan 26, 2017 10:02 am

Just ordered mine! Great idea and great price!

KM Koncepts · Post by **KM Koncepts** » Thu Jan 26, 2017 10:31 am

Nacs Fab wrote:Just ordered mine! Great idea and great price!

THANK YOU Nacs Fab! I just seen the order, should be able to get out in the mail today. Thank you for your business.

Post by **tnbndr** » Fri Jan 27, 2017 8:03 am

Mine arrived yesterday. Will come in handy for certain things.
Shipped in one day.

KM Koncepts · Post by **KM Koncepts** » Fri Jan 27, 2017 8:10 am

tnbndr wrote:Mine arrived yesterday. Will come in handy for certain things.
Shipped in one day.

Tnbndr thanks again for your business and I hope you get many uses out of it. I'm working on getting some videos up.

Nacs Fab · Post by **Nacs Fab** » Mon Jan 30, 2017 12:33 pm

Mine was shipped quickly as well, should arrive today! Thanks!

KM Koncepts · Post by **KM Koncepts** » Wed Feb 01, 2017 7:44 am

Nacs Fab wrote:Mine was shipped quickly as well, should arrive today! Thanks!

Thanks Nacs FAB for the purchase. I hope you get many good uses out of the pointer.

Mechanical pointer for hypertherm duramax torch

Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch

Re: Mechanical pointer for hypertherm duramax torch