It's happen again LOL

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

It's happen again LOL

Post by little blue choo »

Can't wait for a like button or something to that effect. A fairly new Member with 42 post, 41 of them today saying thanks for the share, Some of the files commented on were 7 years old some maybe older and some of the members are no longer with us. Don't take this wrong, All's good with thanking someone for their hard work, it just adds pages for post for the rest of us to go through. I guess this wouldn't happen if I didn't have my preferences set to new post but that's the best way to make sure I see all new post.

Not signing this one. :lol:
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: It's happen again LOL

Post by Largemouthlou »

Saw that this morning!! LOL
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: It's happen again LOL

Post by Gamelord »

I think it is great that people say thank you for sharing. Lack of appreciation is the worlds biggest crime.

I just look at the right side and you can see the name of the person that posted the last post in that thread. When the list gets blown up, after one or two I know which threads to skip by just from looking at the name.

Don't slam someone for being respectful....there is never enough of that in the world today and we need all we can get.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
User avatar
John Frantum
2.5 Star Member
2.5 Star Member
Posts: 156
Joined: Fri Apr 01, 2016 6:42 am

Re: It's happen again LOL

Post by John Frantum »

I don't mind all the thanks, but there's been a few times where I had asked for help finding a file that the feed was blown up, and my request was sent to the bottom of the queue.

That was a bit irritating.
User avatar
steel 35
3.5 Star Member
3.5 Star Member
Posts: 634
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: It's happen again LOL

Post by steel 35 »

Sure did :roll: I think it three times now!
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
RAD
2 Star Member
2 Star Member
Posts: 81
Joined: Fri Aug 28, 2015 3:17 pm

Re: It's happen again LOL

Post by RAD »

Gamelord wrote:I think it is great that people say thank you for sharing. Lack of appreciation is the worlds biggest crime.

I just look at the right side and you can see the name of the person that posted the last post in that thread. When the list gets blown up, after one or two I know which threads to skip by just from looking at the name.

Don't slam someone for being respectful....there is never enough of that in the world today and we need all we can get.
I would like this comment if it had a like button...just saying
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
User avatar
see&see
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 218
Joined: Tue Jun 24, 2014 12:04 pm
Location: Minden, Nevada
Contact:

Re: It's happen again LOL

Post by see&see »

I would like this comment if it had a like button...just saying
Reminds me, over on the Practical Machinist forum with all of the sore head tired machinists having a bad day if you get ONE like over there I'm here to tell you that you earned it.. :lol: :lol: :lol:
You marry into the PlasmaCam family and must accept the fact your software and hardware are proprietary. It's a for better or for worse engagement with overwhelming security. PlasmaCam controls the computer, table, hardware to their advantage IMO. :x
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: It's happen again LOL

Post by Larry83301 »

Perhaps if the same member continues to blow up the list one of the ADMINs should send a PM to that person and link them back to one of these discussions!


Larry
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1460
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: It's happen again LOL

Post by little blue choo »

Hey Larry, I'll hit the like button for that! :lol: :lol: :lol:
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: It's happen again LOL

Post by Larry83301 »

It still goes on, not sure he even sees these posts.

JHART02.JPG

Larry

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

plasmartist
2 Star Member
2 Star Member
Posts: 68
Joined: Mon Aug 07, 2017 1:31 pm

Re: It's happen again LOL

Post by plasmartist »

Maybe posting in that section will yield better results. Now this thread has a relatively useless active thread.
User avatar
steel 35
3.5 Star Member
3.5 Star Member
Posts: 634
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: It's happen again LOL

Post by steel 35 »

7. Members are asked to not act as "back seat moderators". Bring the post to our attention using the report button outlined above.

Sorry admin! Just saying pretty sure he has been notified.
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Post Reply

Return to “CNC Plasma Cutters General Forum”