4 axis controller board

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
bighatbbq
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Sat Mar 03, 2018 6:11 pm

4 axis controller board

Post by bighatbbq »

4 Axis TB6560 Nema23 Stepper Motor Driver Board CNC Controller Breakout Board 4V Type For CNC

Is there a place to buy these boards? I've received 2 bad boards from Amazon. There has to be quality parts out there

https://www.amazon.com/Stepper-Motor-Co ... axis+board
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: 4 axis controller board

Post by tcaudle »

You won't find a "quality" 4 axis stepper drive for 40 bucks. The TBA6560 is pretty much junk. Good news is you can buy them for less than 40 bucks out of china and so you can by 10...or one good American made G540 from Gecko!
User avatar
Nacs Fab
3 Star Member
3 Star Member
Posts: 329
Joined: Tue Dec 04, 2012 4:11 pm
Location: Columbia, MO

Re: 4 axis controller board

Post by Nacs Fab »

I'll second the G540, mine has been running for going on 6 years.
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
Post Reply

Return to “CNC Plasma Cutters General Forum”