It is currently Sun Jun 24, 2018 6:55 am

 

Need old plasma cam install disc

Post your questions or tips on Plasmacam software in this topic.
wyopower
Posts: 11
Joined: Wed May 02, 2018 12:10 pm

Need old plasma cam install disc

Postby wyopower » Wed May 02, 2018 12:16 pm

My old plasma cam pc crashed and burned. I got a new computer, but i do not have plasma cam install disc. i miss plased it or lost it over the years i guess.. I called plasma cam and they said for 1200 bucks i can up grade to new version and get new disc.. Problem is i dont have 1200 bucks and only use this unit a few times per year, so i was wondering if any one new where i could get a hard disc CD of the older plasma cam install disc?
Thanks in advance
Wyopower :?:

beefy
Posts: 1301
Joined: Fri Jan 18, 2013 3:19 am

Re: Need old plasma cam install disc

Postby beefy » Thu May 03, 2018 2:38 am

What a low life company LOL. Holding you to ransom over an old install DVD file set.

Any decent company would just have the DVD ISO file as a download in their archives, or for a fair price would send you another DVD.

I don't care how good their tables might be. When a company does this to customers, I can only hope they eventually lose business, and go out of business.

Hopefully one of the many Plasmacam users has a v3.1 disk. I'm guessing that's the one you are after.
8 x 5 water table
Powermax 1250 with Duramax torch
UCCNC controller, UC400-ETH & UC300-ETH motion controllers.
Sheetcam
Geomagic Design 3D solid modelling
Coreldraw X5

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1399
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Need old plasma cam install disc

Postby tnbndr » Thu May 03, 2018 8:39 am

I would post in the plasma Table discussion forums under PlasmaCam also in hopes of finding a user with the old disc.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com


Return to “Plasmacam Software”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's