Plasma Cam Software Issues?

Plasmacam software related questions and tips can be posted here
Post Reply
justinash
1 Star Member
1 Star Member
Posts: 10
Joined: Sun May 20, 2012 8:50 am

Plasma Cam Software Issues?

Post by justinash »

I had the old software and it acted weird. For example, when trying to move an image it would only move at 90 degree angles. Drawing lines would not align with the cursor. Scaling was jumpy. Stuff like that. I upgraded to the design edge software and I really liked it. It ran perfectly for about a month. Now its acting the same as the old version of the software.The glitches now make it almost impossible to do any editing. Have any of you heard of this before? I'm beginning to think its my computer, but I need a little guidance if anyone could possibly help. Thanks much.
itsnotlevel
1 Star Member
1 Star Member
Posts: 14
Joined: Sat Jan 30, 2010 12:35 am
Location: Marietta, Georgia
Contact:

Re: Plasma Cam Software Issues?

Post by itsnotlevel »

How old is your computer? What operating system? What else do you use your computer for?

Paul
:::Paul Wilson:::
Stay Gold!
Mountain Home
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 244
Joined: Tue Nov 17, 2009 10:39 pm
Location: AR, USA

Re: Plasma Cam Software Issues?

Post by Mountain Home »

It sounds like you have one or more of your snaps set to on, look in your view drop down menu and see if anything is checked, if so uncheck it and see if that solves your problem.
User avatar
AnotherDano
4 Star Member
4 Star Member
Posts: 806
Joined: Fri Dec 18, 2009 11:52 pm
Location: Laramie, Wyoming
Contact:

Re: Plasma Cam Software Issues?

Post by AnotherDano »

Mountain Home wrote:It sounds like you have one or more of your snaps set to on, look in your view drop down menu and see if anything is checked, if so uncheck it and see if that solves your problem.
That's what it looks like to me - try F7.
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
Post Reply

Return to “Plasmacam - DesignEdge”