98z software

Plasmacam software related questions and tips can be posted here
Post Reply
Heritageironmn
1 Star Member
1 Star Member
Posts: 10
Joined: Fri Apr 25, 2014 12:27 am

98z software

Post by Heritageironmn »

Just bought an 98z as an entry level machine with minimum investment.
It came with Plasmacam 1.2 software.
Are their upgrades to this software that would compatable?
If so where would a person get the upgrades?
I realize the obvious answer is to go with a new table and Design Edge.
However, you gotta crawl before ya run, so to speak!

Thank you in advance
HeritageIronMN
drakus
2 Star Member
2 Star Member
Posts: 83
Joined: Sat Nov 17, 2012 1:58 pm
Location: Valparaiso, IN

Re: 98z software

Post by drakus »

Contact plasmacam direct. It will probably cost you some $$$. I do doubt there is any upgrades to it since it is one of their original models.
--------------------------------------------------
Ted
Pcam DHC2 with the works
PM 30, 45 & 65
Corel Draw X6 - Adobe CS5
User avatar
BrianMick
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1003
Joined: Sun Dec 06, 2009 8:00 am
Location: St. Cloud,Minnesota United States of America
Contact:

Re: 98z software

Post by BrianMick »

sup Brian, You ever need any more help just ask
Brian
Metalfx
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Thu Nov 23, 2017 8:24 pm

Re: 98z software

Post by Metalfx »

I'm looking for 1.2 software. Do you still have it?
metladdik
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Wed Feb 13, 2019 10:24 pm

Re: 98z software

Post by metladdik »

I have been back and forth with plasmacam they say they cannot help with the 98z i cant even get the old software they want me to spend thousands to get my machine back up and running. Dont know what to do at this point.
User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: 98z software

Post by rdj357 »

metladdik wrote: Thu Feb 14, 2019 6:02 pm I have been back and forth with plasmacam they say they cannot help with the 98z i cant even get the old software they want me to spend thousands to get my machine back up and running. Dont know what to do at this point.
Sent you a private message.
DXF
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1650
Joined: Tue Feb 22, 2011 5:15 pm
Location: Mountain City, Tennessee

Re: 98z software

Post by DXF »

I have the 1.2 software and the instruction manual in a PDF file. PM me.

Dave Hanks
Craigaz
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Sat Oct 19, 2019 2:06 pm

Re: 98z software

Post by Craigaz »

I recently purchased a 98Z and am uncertain which software version is needed to run it. I've got PlasmaCAM 3.02 and it doesn't want to work. My table is pretty old (2002) and I'm wondering if I should be using older software (1.2?) to get it up and running. Thanks in advance, any guidance is greatly appreciated!

Craig
Post Reply

Return to “Plasmacam - DesignEdge”