3d "soccer ball"...definitely NOT a fire pit

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
noclinkers
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 95
Joined: Thu Jan 09, 2014 12:36 am

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by noclinkers »

Gamelord wrote:The angles are listed in the original post. To get the angles right, you can cut out a triangle with one angle at the correct degree and then tack it or clamp it to the pieces to be welded together. Once you get two together, the rest should start falling into place.
I think the thread is gone?
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 807
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Scratch »

Dang it... It's gone:(
I think I'm the oldest 10 year old boy on the forum...
Simko
3 Star Member
3 Star Member
Posts: 265
Joined: Sat Aug 29, 2015 9:32 pm
Location: North Central Pennsylvania

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Simko »

Here are a few Google cache pages of the topic.

I could only find page 3, 5 and 6, but good reading none the less.

Page 3
http://webcache.googleusercontent.com/s ... clnk&gl=us

Page 5
http://webcache.googleusercontent.com/s ... clnk&gl=us

Page 6
http://webcache.googleusercontent.com/s ... clnk&gl=us
Steve

Homebrewed plasma table in the works, NSK linear rails, 3.2:1 belt reduction, CandCNC Plazpak 1A with DTHCIV Ethercut, Hypertherm 85, CommandCNC and SheetCAM
Click here for build post
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 807
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Scratch »

Thanks for the humorous reading!
I think I'm the oldest 10 year old boy on the forum...
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Gamelord »

noclinkers wrote:
Gamelord wrote:The angles are listed in the original post. To get the angles right, you can cut out a triangle with one angle at the correct degree and then tack it or clamp it to the pieces to be welded together. Once you get two together, the rest should start falling into place.
I think the thread is gone?
The angles are listed in this post, original first post made by the thread starter.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
dikko
2.5 Star Member
2.5 Star Member
Posts: 197
Joined: Sat Aug 13, 2011 7:56 am

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by dikko »

thx for the share
jvhchassisworks
1 Star Member
1 Star Member
Posts: 12
Joined: Wed Oct 07, 2015 7:59 pm
Location: East Windsor, NJ
Contact:

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by jvhchassisworks »

Anyone have the stand for this? It was removed from the old thread along with the other files
Plasma Cam DHC2 4x4 Plasma Table
Hypertherm Powermax 65
User avatar
hdfaster
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 501
Joined: Thu Jan 07, 2010 11:38 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by hdfaster »

Here ya go.

Image
BASE.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Countrylane
2.5 Star Member
2.5 Star Member
Posts: 181
Joined: Wed Jan 20, 2010 6:55 pm
Location: Canada

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Countrylane »

Thank you for the base file hdfaster. Appreciate that very much. Hope someday we'll get another one made.
gjlamp
1 Star Member
1 Star Member
Posts: 21
Joined: Mon Jan 10, 2011 12:45 pm
Location: Northwestern PA

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by gjlamp »

Google "polyhedra" and you will find all sort of items made from geometric shapes. You can make something and build a fire in it. Call it whatever you want.
sawdust1
2.5 Star Member
2.5 Star Member
Posts: 163
Joined: Tue Apr 19, 2016 10:29 pm
Location: In the way.

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by sawdust1 »

Buckminster Fuller would be impressed!
Very awesome. David
home built 4x4 watertable. Qcad, SheetCam and Linuxcnc
Miller 375 Cutmate
Lincoln buzz box and a Miller Mig
KNK MAXX vinyl cutter
The adventure started with a Cricut cutter that I hacked.
ScotchandIron
2 Star Member
2 Star Member
Posts: 53
Joined: Wed Apr 08, 2015 4:21 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by ScotchandIron »

I received a "cease and desist" warning from him on my Etsy store the other day because I was selling my firepit. I have had that up there since before he got his patent on it. I just changed the title to vessel, do you think I should be ok?
eggauto
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 178
Joined: Sun Jul 18, 2010 7:59 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by eggauto »

I've talked to a copyright lawyer who wanted me to build him one. After telling him there was a copyright on it he asked for the copyright number. After his law firm dug into it all they can find out is he holds the copyright on his images. The lawyer told me that if he contacted me again to tell him unless he is willing to send a copy of ALL of the paperwork that he submitted to obtain his copyright tell him to go pound sand.
Last edited by eggauto on Tue May 31, 2016 2:55 pm, edited 1 time in total.
tjenus
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 183
Joined: Mon Jun 06, 2011 11:14 am
Location: Kelso

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by tjenus »


I received a "cease and desist" warning from him on my Etsy store the other day because I was selling my firepit. I have had that up there since before he got his patent on it. I just changed the title to vessel, do you think I should be ok?


Top
I wouldn't sweet it one bit, Sell away, its just a Scare tactic, I have been on both sides of this . its probably one of the hardest things to prove out there, and then get any kind of money out of it, and that goes both ways, thanks KH
5x10 Flow Waterjet
BILLETMAN
2.5 Star Member
2.5 Star Member
Posts: 196
Joined: Fri Jul 26, 2013 4:56 pm
Location: northern california

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by BILLETMAN »

thank you!!!
Dawgonhawg
3 Star Member
3 Star Member
Posts: 487
Joined: Sun Mar 27, 2011 10:13 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Dawgonhawg »

Thanks for sharing.
PODNAH
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Wed Mar 02, 2016 1:21 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by PODNAH »

https://en.wikipedia.org/wiki/Buckminsterfullerene

I dont think he can copyright the shape no matter what he calls it. Geodesic, etc. its been around for a long long time. I think the big question is...does the copyright only pertain to the images he submitted, or to any image applied? I am referencing to the Lizard fellow when I ask the question.
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Gamelord »

He can only copyright his own drawn images on the individual shapes. If you use your own images then you are free to go. The shape itself can not be copyrighted.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Matt70Chevy
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Thu Jan 21, 2016 2:21 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Matt70Chevy »

has anyone build a fire in one of these yet? is 11 gauge strong enough?
qdime2
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Wed Mar 25, 2009 9:15 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by qdime2 »

thank you for the file
Lmpsr70357
2 Star Member
2 Star Member
Posts: 56
Joined: Tue May 17, 2016 1:21 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Lmpsr70357 »

;)
Last edited by Lmpsr70357 on Wed Nov 02, 2016 12:50 pm, edited 1 time in total.
ScotchandIron
2 Star Member
2 Star Member
Posts: 53
Joined: Wed Apr 08, 2015 4:21 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by ScotchandIron »

I believe that "Lizard King", the one who claims the copyright on the geodesic fireball, and who was banned from this site is the poster using a different handle of "Lmpsr70357" on this page now. Just FYI and a heads up to everyone on here.
Midwesternhunter1985
2 Star Member
2 Star Member
Posts: 64
Joined: Thu Jan 09, 2014 4:25 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Midwesternhunter1985 »

ScotchandIron wrote:I believe that "Lizard King", the one who claims the copyright on the geodesic fireball, and who was banned from this site is the poster using a different handle of "Lmpsr70357" on this page now. Just FYI and a heads up to everyone on here.

Pretty sure ScotchandIron is right on the money with this.




Re: Copyright infringement

Quote









Postby Lmpsr70357 » Thu May 26, 2016 9:06 pm

so many cutting tables will go out of business when copyright owners come after cnc cutting table owners. easy to find you, just look right here on plasma spider. believe it or not. cnc plasma cutting table manufactures hate copyright, trademark, patent laws. just to stir sh*t up again.............


Top



Lmpsr70357 Posts: 3Joined: Tue May 17, 2016 1:21 pmContact:
Contact Lmpsr70357


Re: Copyright infringement

Quote


Postby Lmpsr70357 » Fri May 27, 2016 6:40 pm

15 copyright cease and desist notifications out today, People really do hate me, that makes me sad.......now my patent is pending and will strengthen the rights to my design and protect 30 shops that purchased rights to build it.
Lmpsr70357
2 Star Member
2 Star Member
Posts: 56
Joined: Tue May 17, 2016 1:21 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Lmpsr70357 »

;)
Last edited by Lmpsr70357 on Wed Nov 02, 2016 12:50 pm, edited 1 time in total.
Redneck
3 Star Member
3 Star Member
Posts: 273
Joined: Sat Oct 06, 2012 7:16 pm

Re: 3d "soccer ball"...definitely NOT a fire pit

Post by Redneck »

I'm glad to see Louis back.......this is getting to be quite entertaining again ;)
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”