6 sided fire pit, dxf and pcm

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
thissideup
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sun Nov 20, 2011 12:19 am

6 sided fire pit, dxf and pcm

Post by thissideup »

here it is, enjoy and please post your versions.

Image
6 side fire pit.dxf
6 side fire pit.pcm

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

MetalTorcher
3 Star Member
3 Star Member
Posts: 450
Joined: Sun Sep 08, 2013 2:17 pm
Location: Manitoba

Re: 6 sided fire pit, dxf and pcm

Post by MetalTorcher »

Nifty, thanks for the share!
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
Bad Cat2
1 Star Member
1 Star Member
Posts: 10
Joined: Mon Feb 18, 2013 8:34 pm

Re: 6 sided fire pit, dxf and pcm

Post by Bad Cat2 »

You are too generous !!! Thank you soo much. I made one of your other fire pits and it turned out so nice. I can't wait to cut one of these.
cbassjr
3 Star Member
3 Star Member
Posts: 307
Joined: Fri Dec 21, 2012 5:21 pm

Re: 6 sided fire pit, dxf and pcm

Post by cbassjr »

How big is this pit fire box? How much of a 4x8 sheet does it take?
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: 6 sided fire pit, dxf and pcm

Post by muzza »

Thanks for the share, looks good.
Murray
wickedinhere
4 Star Member
4 Star Member
Posts: 751
Joined: Thu Jun 09, 2011 9:03 pm

Re: 6 sided fire pit, dxf and pcm

Post by wickedinhere »

Nice, what angle is the bend?
thissideup
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sun Nov 20, 2011 12:19 am

Re: 6 sided fire pit, dxf and pcm

Post by thissideup »

wickedinhere wrote:Nice, what angle is the bend?
google sketch up says it's 124.8 but i just bend by eye so i can't confirm.
User avatar
MetalheadRK
3 Star Member
3 Star Member
Posts: 300
Joined: Fri Mar 23, 2012 4:44 pm

Re: 6 sided fire pit, dxf and pcm

Post by MetalheadRK »

Very nice! Thanks for sharing.
4x4 PlasmaCam
Hypertherm 45
Eastwood 175 MIG welder
starr_motorsports
1 Star Member
1 Star Member
Posts: 19
Joined: Tue Nov 05, 2013 4:56 am

Re: 6 sided fire pit, dxf and pcm

Post by starr_motorsports »

How big across is this one?
thissideup
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sun Nov 20, 2011 12:19 am

Re: 6 sided fire pit, dxf and pcm

Post by thissideup »

starr_motorsports wrote:How big across is this one?
36 across the points, 32 across the flats
sbest1
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 628
Joined: Fri Jan 16, 2009 10:26 pm

Re: 6 sided fire pit, dxf and pcm

Post by sbest1 »

Sweet, thanks!
weldor2005
3 Star Member
3 Star Member
Posts: 354
Joined: Fri Mar 01, 2013 4:22 pm
Location: Southern Kansas City Area
Contact:

Re: 6 sided fire pit, dxf and pcm

Post by weldor2005 »

I like it, but for the numbers, you spend more time welding on this one. Though you might have a higher premium with 6 customizable sides.
David Finch CWI

Plenty of welders
Plasmacam 4x4 with DHC2
PowerMax 45
Lots of other toys
User avatar
TEXRAMSEY
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Thu Dec 02, 2010 11:06 am

Re: 6 sided fire pit, dxf and pcm

Post by TEXRAMSEY »

I like the fire pit. Will be trying it soon. Thanks
User avatar
yeomansjon
3 Star Member
3 Star Member
Posts: 329
Joined: Fri Oct 05, 2012 1:28 pm
Contact:

Re: 6 sided fire pit, dxf and pcm

Post by yeomansjon »

Looks great! I like the lettering, what font did you use?
Fast Jonny Custom Design
CNC Plasma Cutting
Plasmacam DHC
Hypertherm Powermax 1000
www.facebook.com/fastjonnycustomdesign
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1108
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: 6 sided fire pit, dxf and pcm

Post by CNCCAJUN »

thissideup wrote:
wickedinhere wrote:Nice, what angle is the bend?
google sketch up says it's 124.8 but i just bend by eye so i can't confirm.
Would that also be a 55.2 degree bend?

Steve :D
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
No Class
2 Star Member
2 Star Member
Posts: 60
Joined: Thu Jan 09, 2014 9:33 pm

Re: 6 sided fire pit, dxf and pcm

Post by No Class »

Here are a couple some students made. Made a slightly smaller version also. Great file thanks for sharing. Is $100 for blasting and ceramic coating reasonable?
image.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

MGardner
2 Star Member
2 Star Member
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Re: 6 sided fire pit, dxf and pcm

Post by MGardner »

Does the ceramic coating hold up better to the heat? I was going to use flat black high temp spray paint?
thissideup
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sun Nov 20, 2011 12:19 am

Re: 6 sided fire pit, dxf and pcm

Post by thissideup »

yeomansjon wrote:Looks great! I like the lettering, what font did you use?
honestly I have no idea, I just scroll through the fonts till i find one I like.
thissideup
2.5 Star Member
2.5 Star Member
Posts: 150
Joined: Sun Nov 20, 2011 12:19 am

Re: 6 sided fire pit, dxf and pcm

Post by thissideup »

No Class wrote:
image.jpg
Here are a couple some students made. Made a slightly smaller version also. Great file thanks for sharing. Is $100 for blasting and ceramic coating reasonable?
absolutely, I wont start my sand blaster for less than $100.
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: 6 sided fire pit, dxf and pcm

Post by tnbndr »

$100 for blasting and ceramic coating is almost like free.!!
Do it and let us know how the ceramic holds up to the heat. They use it on engines and exhaust systems so I would assume it will be fine.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
gocanes719
1.5 Star Member
1.5 Star Member
Posts: 38
Joined: Thu Dec 04, 2008 11:52 am

Re: 6 sided fire pit, dxf and pcm

Post by gocanes719 »

Is this file missing the base at the bottom?
doggone
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Mon Jan 20, 2014 12:58 pm

Re: 6 sided fire pit, dxf and pcm

Post by doggone »

Thanks for sharing going to give it a shot.
Andy
smazeppa
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Thu Sep 24, 2009 11:51 am

Re: 6 sided fire pit, dxf and pcm

Post by smazeppa »

Hi, thanks for sharing the 6 sided fire pit. It is awesome. I just cut it out tonight, but I am having a hard time getting the sides to match together nice. Does anyone know what the bend is on this firepit? I will post a picture once I get it all together. It is customized on the top side and the bottom. Turned out really nice, if I can just get the right angle for the bend. Thanks for any help that anyone can give me. :)
storiesnsteel
3 Star Member
3 Star Member
Posts: 329
Joined: Thu Mar 08, 2012 9:41 am
Location: Hickson Ontario Canada
Contact:

Re: 6 sided fire pit, dxf and pcm

Post by storiesnsteel »

very very nice thank you
Greg From Storiesnsteel
Countrylane
2.5 Star Member
2.5 Star Member
Posts: 181
Joined: Wed Jan 20, 2010 6:55 pm
Location: Canada

Re: 6 sided fire pit, dxf and pcm

Post by Countrylane »

Just completed a fire pit with this dxf, some customization was done with words around the base. I set the protractor to be 125 degrees around the outside radius of bends, worked out perfectly!!! Thanks a lot!!! It is more welding but it could also be made from left over scraps from other projects, so that is a bonus!!
Countrylane Metal Art Work
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”