Dragonfly

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Dragonfly

Post by SeanP »

I made up this file today from a 3d dragonfly shared on here, it worked out really well, I cut it out of 2mm at 330mm wide.

Image
Dragonfly.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: Dragonfly

Post by Largemouthlou »

Very nice, thanks for the share!!.
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
kangy
2 Star Member
2 Star Member
Posts: 68
Joined: Tue Jan 28, 2014 3:20 am
Location: South Africa

Re: Dragonfly

Post by kangy »

great file, thanks for the share

Pat
User avatar
Oldsarge
3.5 Star Member
3.5 Star Member
Posts: 636
Joined: Tue Feb 22, 2011 10:12 am
Location: Lacey, WA

Re: Dragonfly

Post by Oldsarge »

Really nice work, been using a lot of bugs lately.. Thanks!

Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
User avatar
Craig
3.5 Star Member
3.5 Star Member
Posts: 628
Joined: Mon Dec 24, 2012 3:43 pm

Re: Dragonfly

Post by Craig »

Thanks for the share Sean, my wife loves Dragonfly's I think I will make her one for her birthday. And on a side you are one lucky guy to live in one of the most beautiful counties in the world, everyone should get to ride the "Ring of Kerry".

Craig Johnson
Craig Johnson
beefy
4.5 Star Member
4.5 Star Member
Posts: 1504
Joined: Fri Jan 18, 2013 3:19 am

Re: Dragonfly

Post by beefy »

Thanks very much Sean, that's a nice looking dragonfly.

Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
rtsplace
2 Star Member
2 Star Member
Posts: 84
Joined: Tue Nov 29, 2011 7:25 am

Re: Dragonfly

Post by rtsplace »

Thanks for the file, but I only see a top view of the silholette ? Would like to cut a 3-d one for a friend ?
Thanks Ray
beefy
4.5 Star Member
4.5 Star Member
Posts: 1504
Joined: Fri Jan 18, 2013 3:19 am

Re: Dragonfly

Post by beefy »

As Sean mentioned in his opening post, it's a file that has been shared on here.

Try a search for Dragonfly and it should come up.

Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
rtsplace
2 Star Member
2 Star Member
Posts: 84
Joined: Tue Nov 29, 2011 7:25 am

Re: Dragonfly

Post by rtsplace »

Yes, I found the file, but it's only a 5 piece file. Not the complete 3 D one like Sean has posted ? Would like to cut the file as seen in the post. If not I'll print it and scan it and trace it, or at least try. I need the practice at tracing. :>)
Thanks Ray
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Dragonfly

Post by Larry83301 »

I think this is the same dragonfly in the post above, looks right. :D

Image
Dragonfly.dxf
Larry

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Dragonfly

Post by SeanP »

That's the one larry, thanks, sorry I meant to get back to this one.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Dragonfly

Post by acourtjester »

This may help some it a animation of assembly for the dragonfly.
https://www.youtube.com/watch?v=mn9iK9RS4xQ
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
waaiaengineering
1 Star Member
1 Star Member
Posts: 17
Joined: Mon Mar 10, 2014 6:21 am

Re: Dragonfly

Post by waaiaengineering »

Thanks for sharing.I have quite a few customers after one of these just have not had the time to draw one.Thanks again.
User avatar
trtilton61
2 Star Member
2 Star Member
Posts: 63
Joined: Mon Jul 15, 2013 4:45 pm

Re: Dragonfly

Post by trtilton61 »

Thanks for the file.
Precision Plasma HDSE-4x8
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: Dragonfly

Post by rickjamesbish »

The animation assembly appears to be a different puzzle. Does anyone know where to find assembly instructions for the dxf posted here ?
gary42095
2.5 Star Member
2.5 Star Member
Posts: 194
Joined: Sun Feb 26, 2012 1:42 pm

Re: Dragonfly

Post by gary42095 »

if i remember, i will take a couple of pics of one at my shop tomorrow to check you started , its pretty easy once you get a good look
DWalden
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Tue Nov 01, 2016 8:37 am
Location: Athens Tn

Re: Dragonfly

Post by DWalden »

That's cool, I made one about 2 years ago.
Screenshot_2016-03-27-12-49-18-1.png

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”