Help converting to dxf

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
deannasanmiguel
1 Star Member
1 Star Member
Posts: 23
Joined: Tue Jun 04, 2013 7:52 pm

Help converting to dxf

Post by deannasanmiguel »

I am having a heck of a time, please help! Thank you..:)

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

kkroger
2.5 Star Member
2.5 Star Member
Posts: 229
Joined: Sat Apr 26, 2014 7:56 pm

Re: Help converting to dxf

Post by kkroger »

Death Valley Days? Borax? 20 Mule Team?
I have some artwork of that that I did years ago, but not cuttable...
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Help converting to dxf

Post by Larry83301 »

Unless you are making a LARGE cutout may I suggest you use something like this picture 10 times and place a wagon behind it. :?: The picture you show would loose most to the detail unless it gets very big. Just my 2 cents

Larry

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

kkroger
2.5 Star Member
2.5 Star Member
Posts: 229
Joined: Sat Apr 26, 2014 7:56 pm

Re: Help converting to dxf

Post by kkroger »

Larry83301 wrote:Unless you are making a LARGE cutout may I suggest you use something like this picture 10 times and place a wagon behind it. :?: The picture you show would loose most to the detail unless it gets very big. Just my 2 cents

Larry
He's going the wrong way though and the Mule Team has 3 wagons two boxes and a tanker...
:D
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Help converting to dxf

Post by Larry83301 »

Ok, now he's going the right way! :lol: :lol: :lol: :lol: :lol:

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Help converting to dxf

Post by tnbndr »

^^^^ :lol: :lol: :lol:
But he's in the Land Down Under.!
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
Thumper
2.5 Star Member
2.5 Star Member
Posts: 110
Joined: Tue Jan 29, 2013 8:22 pm

Re: Help converting to dxf

Post by Thumper »

Holy Crap!!!! Might as well get the south end of that northbound mule because that's whats its going to look like anyway :lol: :lol: :lol: Unless its about 25 feet long :shock:
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Help converting to dxf

Post by Larry83301 »

tnbndr wrote:^^^^ :lol: :lol: :lol:
But he's in the Land Down Under.!
Wrong Larry, but that's OK. :D :D :D I live in that land up north called Idaho.

Larry
User avatar
primaldesigns
2.5 Star Member
2.5 Star Member
Posts: 198
Joined: Wed Jun 08, 2011 1:08 am
Location: Pasadena, Calif

Re: Help converting to dxf

Post by primaldesigns »

I posted a mule train pack about a year ago. Here is the link to the post.

http://www.plasmaspider.com/viewtopic.p ... ain#p58662
deannasanmiguel
1 Star Member
1 Star Member
Posts: 23
Joined: Tue Jun 04, 2013 7:52 pm

Re: Help converting to dxf

Post by deannasanmiguel »

Perfect! thank you very much... (I am cutting a pretty large one, but not 25 ft..lol...)
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”