Beer Holder
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Beer Holder
Here is an idea I've been kicking around for a while.
I just haven't gotten around to it.
This is a "European Door Stop". Many of the older buildings have a wide range of gaps under the doors - or so the story goes. Maybe Peter of another of our guys from 'over there' can chime in. This is a 'bend it to fit' novelty piece.
I want to tweak it into a 'sitting position' and size it to fit a beer can on his lap with his arms wrapped around the can.
Weld a stout rod to its butt to stick in the ground next to a lawn chair and relax.
With the right sizing a name could be added - the imagination soars.
If anyone wants to take this and run with it, have at it. Just post the file, please, and save me some time.
I just haven't gotten around to it.
This is a "European Door Stop". Many of the older buildings have a wide range of gaps under the doors - or so the story goes. Maybe Peter of another of our guys from 'over there' can chime in. This is a 'bend it to fit' novelty piece.
I want to tweak it into a 'sitting position' and size it to fit a beer can on his lap with his arms wrapped around the can.
Weld a stout rod to its butt to stick in the ground next to a lawn chair and relax.
With the right sizing a name could be added - the imagination soars.
If anyone wants to take this and run with it, have at it. Just post the file, please, and save me some time.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1213
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: Beer Holder
Pretty good imagination there! Large enough to hold the beer snuggie snugly I suppose. I've downloaded and will give 'er a look.
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Beer Holder
Do able for sure with some modifications!! Perfect material for this job is aluminum!!
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Beer Holder
You're such an aluminum bigot!Largemouthlou wrote:Do able for sure with some modifications!! Perfect material for this job is aluminum!!
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1213
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: Beer Holder
Here's a quick sketch.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 18
- Joined: Mon Oct 28, 2013 1:23 pm
Re: Beer Holder
it works great
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Beer Holder
Beer holder ?
Down here we use that to dilute the the beer for sheilas and call it a shandy
Murray
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Beer Holder
Why dilute their beer??? Doesn't that defeat the purpose????muzza wrote:
Beer holder ?
Down here we use that to dilute the the beer for sheilas and call it a shandy
Murray
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Beer Holder
Wow,,,
I finally posted something that found a following.
Atta Boys for giving it a shot!
Dano
I finally posted something that found a following.
Atta Boys for giving it a shot!
Dano
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
- larrycameron44
- 3.5 Star Member
- Posts: 579
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
Re: Beer Holder
Not just the sheilas Muzza us fellas drink it too, oh tis nice on a hot day. And in case anyone is wondering what a "Sheila" is, it's a girl
Larry
NZ
Larry
NZ
muzza wrote:
Beer holder ?
Down here we use that to dilute the the beer for sheilas and call it a shandy
Murray
-
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Beer Holder
Largemouthlou wrote:Why dilute their beer??? Doesn't that defeat the purpose????muzza wrote:
Beer holder ?
Down here we use that to dilute the the beer for sheilas and call it a shandy
Murray
Larry pretty much answered you above Lou but just to clarify "sheila" is Aussie slang for the fairer gender but also used as a bit of a piss take at a bloke (Aussie male) who shows feminine characteristics ie diluting his beer
Another little side note, Larry's a "kiwi" slang for New Zealander of which we have many here in Oz (probably more here than NZ) who are generally pretty good blokes who enjoy a joke and a laugh too but something most wont admit to is that they really wish they were Aussies.
Murray
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Beer Holder
I loves me some Kiwis, Aussies and all you fine fellows from the other side of the globe.
When I can't seem to fall into a slumber, y'all are up and going, posting good stuff on the forum and giving me something to do.
Cheers to everyone. Stop and think of the nationalities we have represented here. It's awesome.
When I can't seem to fall into a slumber, y'all are up and going, posting good stuff on the forum and giving me something to do.
Cheers to everyone. Stop and think of the nationalities we have represented here. It's awesome.
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Beer Holder
Dano, just about everyone follows beer!!!!!!! Watered down or not!!AnotherDano wrote:Wow,,,
I finally posted something that found a following.
Atta Boys for giving it a shot!
Dano
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
- Metal Storm
- 2.5 Star Member
- Posts: 198
- Joined: Tue Nov 27, 2012 1:28 am
- Location: Arizona
Re: Beer Holder
Sorry, me no speak Oz or Kiwi. Only speak Az. Its like 'espanglich' which is a cross between Spanish=75% English=120% and charades=80%. Don't bother with the math because it would appear that neither (neither) make any scense.
Metal Storm
by J.P. Janeway
nuke1jj@gmail.com
Plasma Cam DHC2
Thermal Dynamics Cutmaster 38
by J.P. Janeway
nuke1jj@gmail.com
Plasma Cam DHC2
Thermal Dynamics Cutmaster 38
-
- 2 Star Member
- Posts: 50
- Joined: Wed Mar 13, 2013 10:59 pm
-
- 2.5 Star Elite Contributing Member
- Posts: 166
- Joined: Thu Jun 16, 2011 9:19 am
- Location: Marshfield, MA.
- Contact:
Re: Beer Holder
Why would you put your beer down?
Omax 80X Waterjet 6 x 12 with Tilt-A-Jet
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2645
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Beer Holder
It keeps the empties off the ground!
Larry
Larry
-
- 2.5 Star Member
- Posts: 101
- Joined: Thu Apr 16, 2015 9:04 am
Re: Beer Holder
Very cool, thanks for sharing.
-
- 4 Star Elite Contributing Member
- Posts: 1929
- Joined: Fri Apr 17, 2009 11:48 am
Re: Beer Holder
Awesome thread, haven't seen this one yet. Good stuff, thanks guys.
- ben de lappe
- 4 Star Elite Contributing Member
- Posts: 1213
- Joined: Mon Aug 03, 2009 9:37 am
- Location: North Mississippi
Re: Beer Holder
Good to see old posts come back. Especially when it's something to do with the OP AnotherDano. Miss him dearly. His last post was Mon. August 10th 2015 as he suddenly passed shortly after. Hope you're relaxing up there with your beer in it's holder watching down on all the cool cnc plasma stuff going on.
Last edited by ben de lappe on Fri Oct 04, 2019 9:18 am, edited 1 time in total.
-
- 3 Star Member
- Posts: 371
- Joined: Mon Sep 10, 2012 8:06 pm
- Location: New Providence, PA
Re: Beer Holder
Dis is Enoch, my Amish beer holder
-
- 4.5 Star Elite Contributing Member
- Posts: 2567
- Joined: Thu Jul 24, 2008 11:15 am
Re: Beer Holder
Doin a great job Enoch