Australian Shepherd dog silhouette
-
- 2.5 Star Member
- Posts: 199
- Joined: Mon Dec 08, 2014 4:33 pm
- Location: Gentry, AR
- Contact:
Australian Shepherd dog silhouette
Hey everyone,
A little silhouette I traced and cut yesterday(for my mom). Thought I would share it with whoever wants it!
it's right around 15.5 in. wide. Enjoy.
A little silhouette I traced and cut yesterday(for my mom). Thought I would share it with whoever wants it!
it's right around 15.5 in. wide. Enjoy.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
5x10 Dynatorch High Definition plasma table. Cuttingshop drawing program. Sigmanest nesting program. Custom fabrication and powder coating.
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
- AnotherDano
- 4 Star Member
- Posts: 806
- Joined: Fri Dec 18, 2009 11:52 pm
- Location: Laramie, Wyoming
- Contact:
Re: Australian Shepherd dog silhouette
Tankyouberrymush................
That's a very good design.
Dano
That's a very good design.
Dano
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
-
- 4 Star Elite Contributing Member
- Posts: 993
- Joined: Thu Nov 21, 2013 5:32 pm
Re: Australian Shepherd dog silhouette
great file..thanks for sharing
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Australian Shepherd dog silhouette
Thank you and that is great work..One of my dogs is part of that breed
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
- 2.5 Star Member
- Posts: 199
- Joined: Mon Dec 08, 2014 4:33 pm
- Location: Gentry, AR
- Contact:
Re: Australian Shepherd dog silhouette
HammerDownJustin wrote:Thank you and that is great work..One of my dogs is part of that breed
Ya, they're good dogs...!
Thank ya'll for saying thanks!
5x10 Dynatorch High Definition plasma table. Cuttingshop drawing program. Sigmanest nesting program. Custom fabrication and powder coating.
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
-
- 3 Star Member
- Posts: 273
- Joined: Sat Oct 06, 2012 7:16 pm
Re: Australian Shepherd dog silhouette
Great job on the design!
Here is my Australian Shepherd, Gina. Best dog I've ever had.
Here is my Australian Shepherd, Gina. Best dog I've ever had.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Elite Contributing Member
- Posts: 355
- Joined: Sun Jan 22, 2012 5:39 pm
Re: Australian Shepherd dog silhouette
Great job!! Was it kinda sporty cleaning it up? I have done a few similar to this and have almost learned patience while cleaning dross off. lol
K D Metal Werks
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Australian Shepherd dog silhouette
Very nice!! Thanks for the share
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
- 2.5 Star Member
- Posts: 199
- Joined: Mon Dec 08, 2014 4:33 pm
- Location: Gentry, AR
- Contact:
Re: Australian Shepherd dog silhouette
K D Metalwerks wrote:Great job!! Was it kinda sporty cleaning it up? I have done a few similar to this and have almost learned patience while cleaning dross off. lol
Ha, ya, I know what you mean! I didn't think this one was too bad. Had to bear down a little in some places but not bad...
5x10 Dynatorch High Definition plasma table. Cuttingshop drawing program. Sigmanest nesting program. Custom fabrication and powder coating.
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
Whatsoever thy hand findeth to do, do it with thy might Ecclesiastes 9:10
-
- 1 Star Member
- Posts: 17
- Joined: Mon Mar 10, 2014 6:21 am
Re: Australian Shepherd dog silhouette
Thanks for sharing my wife will love it.
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
-
- 3.5 Star Member
- Posts: 566
- Joined: Wed Sep 19, 2012 6:43 am
Re: Australian Shepherd dog silhouette
Great file! The only thing I would do is thicken up that line under the left eye where it attaches to the ear.
And for some reason the right eye bugs me...lol I fixed it a bit, not that the original file has anything wrong, just fixed it the way I would cut it.
Thanks a bunch!
And for some reason the right eye bugs me...lol I fixed it a bit, not that the original file has anything wrong, just fixed it the way I would cut it.
Thanks a bunch!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here