Proud American
-
- 1 Star Member
- Posts: 12
- Joined: Sat Oct 22, 2011 10:42 pm
Proud American
Not sure how to convert from plasama cam to dxf, hope someone can use it
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Member
- Posts: 1009
- Joined: Mon May 21, 2012 3:58 pm
- Location: spanaway wa.
Re: Proud American
Looks nice but where's the Coast Guard
thanks for the post.
Jim
thanks for the post.
Jim
- tony506
- 2.5 Star Member
- Posts: 105
- Joined: Thu Jun 06, 2013 10:10 am
Re: Proud American 1 of 2
Converted to DXF
Had to post in 2 files as to big to upload as one.
Had to post in 2 files as to big to upload as one.
Eastern Canada
Hobby Shop/Business
PlasmaCam DHC2 with Design Edge
Hypertherm Powermax 65
Lincoln Mig
Everlast Tig & Stick
Hobby Shop/Business
PlasmaCam DHC2 with Design Edge
Hypertherm Powermax 65
Lincoln Mig
Everlast Tig & Stick
- tony506
- 2.5 Star Member
- Posts: 105
- Joined: Thu Jun 06, 2013 10:10 am
Re: Proud American 2
Dxf conversion page 2 f 2
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Eastern Canada
Hobby Shop/Business
PlasmaCam DHC2 with Design Edge
Hypertherm Powermax 65
Lincoln Mig
Everlast Tig & Stick
Hobby Shop/Business
PlasmaCam DHC2 with Design Edge
Hypertherm Powermax 65
Lincoln Mig
Everlast Tig & Stick
- tony506
- 2.5 Star Member
- Posts: 105
- Joined: Thu Jun 06, 2013 10:10 am
Proud American 1
Trying again, no: 1 of 2
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Eastern Canada
Hobby Shop/Business
PlasmaCam DHC2 with Design Edge
Hypertherm Powermax 65
Lincoln Mig
Everlast Tig & Stick
Hobby Shop/Business
PlasmaCam DHC2 with Design Edge
Hypertherm Powermax 65
Lincoln Mig
Everlast Tig & Stick
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Proud American
Thanks for posting.
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1669
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Proud American
The Proud American 1.dxf comes up blank on my end.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- tturanger
- 2 Star Member
- Posts: 82
- Joined: Fri Sep 28, 2012 1:13 pm
- Location: Texas
Re: Proud American
MURICA