Free Fire Pit and Fire Ring

[mike 1948]

These are some variations of a knockdown (no welding) fire pit DXF files. I am reposting so all the files are in one spot. Also I made up 3 variations of the side plates, one with plain slots, one with bears, one with moose. It was designed for 1/4 inch thick material but it should work for thinner stock also. The "large is 37" and the "small is 31" across. You will need 1 bottom plate, 4 side plates and 4 supports. If there are any problems please let me know.

Did the knockdown Fire Pit but thought I would also post a knockdown Fire Ring with only "sides". The material is 3/16 thick x 12" high x 24 " long. Six of them will make a ring about 37" across, 7 about 44", and 8 about 50" across.
Deer, bear, moose and slots are attached. Mix and match.

Enjoy
Mike

[m_drunk]

thanks!

[Terry]

Thanks good idea

Terry

[trucks1948]

Thank you for sharing

[someguy]

Nice work.
Thanks for the post.

[storiesnsteel]

looks great thank you

[Redneck]

Thank you!

[otisa2007]

very nice thankyou

[mayper]

thanks for sharing

[awt112]

very nice.. thanks

[smoke]

thanks for sharing

[BearFab]

Thanks Mike look excelent

[DJDHC4X4]

thank you, very nice.

[Buzzard Gut]

Thanks Mike , I'm gonna have to try one of these.

[radicalrescue]

thanks for that file ,,has any one cut out one yet.