
Little help-Construction Sign
-
- 3.5 Star Member
- Posts: 742
- Joined: Thu Jun 09, 2011 9:03 pm
Little help-Construction Sign
I cant seem to get a good trace on this i just need the paul davis part. HELP. LOL


- rdj357
- 4 Star Elite Contributing Member
- Posts: 1186
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: Little help
Pretty small low res picture. I cleaned up the image a little and imported, then did a little cleaning. Depending on the size you're cutting you might be able to use it like this or need to straighten up a little more.
- Robert
- Robert
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
-
- 3.5 Star Member
- Posts: 742
- Joined: Thu Jun 09, 2011 9:03 pm
Re: Little help
Thanks that's about what i came up with i just couldn't get the letters like i wanted them.
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: Little help
May work! Nope looked worse on mine 

Last edited by steel 35 on Sat Jul 18, 2015 3:06 pm, edited 1 time in total.
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
-
- 3.5 Star Member
- Posts: 742
- Joined: Thu Jun 09, 2011 9:03 pm
Re: Little help
This is what it looked like in corelx5.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Member
- Posts: 1498
- Joined: Fri Jan 18, 2013 3:19 am
Re: Little help
Coreldraw x5 manual trace.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: Little help
be sure to show us pics when you are done.
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
- 3.5 Star Member
- Posts: 562
- Joined: Fri Jan 24, 2014 11:03 pm
Re: Little help-Construction Sign
Might take a look at this one. Not sure how it looks compared to the others but it seems pretty sharp, unless you need it 10 feet long. Might want to take a hard look at the corners if you scale it up that big.
Shane
Shane
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3.5 Star Member
- Posts: 742
- Joined: Thu Jun 09, 2011 9:03 pm
Re: Little help-Construction Sign
Thanks guys for all the help. Beefy called me out cause I didn't say thanks fast enough for him. I was waiting till i cut it so i could post the pic of it and say thanks. I guess some people keep track of that stuff as for me i am way to busy for that.
Thanks for all the help and here is a pic.
Thanks for all the help and here is a pic.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Member
- Posts: 1498
- Joined: Fri Jan 18, 2013 3:19 am
Re: Little help-Construction Sign
I'll say thanks for making me look like the bad one.wickedinhere wrote:Thanks guys for all the help. Beefy called me out cause I didn't say thanks fast enough for him. I was waiting till i cut it so i could post the pic of it and say thanks. I guess some people keep track of that stuff as for me i am way to busy for that.
Thanks for all the help and here is a pic.
This forum is getting worse, and good members seem to be leaving. This is just one of the reasons.
I consider it a basic courtesy to say a simple, "Cheers lads", when they've helped me. In contrast you are perfectly comfortable with coming back in a week or so at your convenience to say thanks. Might believe you but this isn't the first time with you. Anyway, good show of appreciation. Yeah of course you are too busy to do that, but you ain't too busy to ask someone to do it for you in the first place or come back in that thread and add a comment here and there UNTIL you have what you want. But oh it's way too much to say, "Thanks lads, I'll come back with a picture of the finished cut". Nah stuff the guys who I asked for help. If they come back to this thread in a week or so they'll see my thankyou.
Well I'm getting more and more tired of doing traces for people like yourself who are out there doing business from this game but haven't learnt how to do a basic manual trace. It doesn't get much simpler than that one. Whenever auto trace doesn't work, get a member to do it for them.
Guess we're all brought up with different thoughts of saying thanks to help we asked for.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
-
- 3.5 Star Member
- Posts: 742
- Joined: Thu Jun 09, 2011 9:03 pm
Re: Little help-Construction Sign
We'll beefy if your getting tired of people like me asking for help STOP HELPING PEOPLE LIKE ME as you put it. I serious doubt people are leaving because i didn't say thanks on your time schedule. People are leaving because of PEOPLE like you, I mean who keeps tracks of people on plasmaspider and what they do on here. Beefy please don't ever spend your time helping me again. I mean you said this isn't the first time i did this so why help me again? I might have forgotten to thank someone and i can admit that.
-
- 3 Star Member
- Posts: 261
- Joined: Wed Nov 07, 2012 11:24 am
- Location: Virginia
Re: Little help-Construction Sign
Beefy if you spent half as much time making projects and working as you do bitching at people on here youd be a damn millionaire. If I do a trace on here for someone its because I had a little extra time and just enjoy giving back. Dont expect money, a thank you or anything else. Just knowing I helped someone is enough for me. Weve been through this before, Ive always personally said thank you for the few times I have been helped on here, but if I help someone I dont expect anything, just the type of person I am. I barely get on PS anymore but every time I do I see you complaining about something. Find something else to do....and for everyones sake stop helping people.
PlasmaCam DHC2
Hypertherm Powermax 65
Millermatic 211 MIG Welder
Hypertherm Powermax 65
Millermatic 211 MIG Welder
-
- 4 Star Member
- Posts: 1498
- Joined: Fri Jan 18, 2013 3:19 am
Re: Little help-Construction Sign
What a very stupid thing to say, when you have no idea what I do outside of this forum. You have absolutely no idea what I do, how much I do, when I do those things. I am never not doing something. A very small amount of my time is spent here, and due to people like yourself who spuriously say very silly and untrue things like the above, it's getting less. Think before you speak and don't say things you have absolutely no idea of.icmplasma85 wrote:Beefy if you spent half as much time making projects and working as you do bitching at people on here youd be a damn millionaire. If I do a trace on here for someone its because I had a little extra time and just enjoy giving back. Dont expect money, a thank you or anything else. Just knowing I helped someone is enough for me. Weve been through this before, Ive always personally said thank you for the few times I have been helped on here, but if I help someone I dont expect anything, just the type of person I am. I barely get on PS anymore but every time I do I see you complaining about something. Find something else to do....and for everyones sake stop helping people.
As for you last piece of BS, saying you only ever see me complaining about something, people can look through my posts and decide for themselves if that's the ONLY thing I do.
If it's wrong to pull some one up for not saying a simple "thanks" then I'm very guilty. It's getting more clear it's a crime here to do such a thing here.
Apart from the other BS you speak, I'm taking notice of what you suggested. That was the last conversion I'll be doing here, good advice.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
-
- 3 Star Member
- Posts: 261
- Joined: Wed Nov 07, 2012 11:24 am
- Location: Virginia
Re: Little help-Construction Sign
It seems as if you help people hoping they wont say thanks so you can then bitch about it. You can run your mouth all you want but the fact is I have seen numerous posts from you on this topic. It gets old. Its like a person who keeps sticking a fork in an electrical socket and wondering why they get shocked. Youre right I dont know how much work you do and frankly dont care, but I do see how much you post about this BS topic, so I can and will comment on that. I couldnt care less if you get on PS all the time or never, doesnt affect my life. And I guarantee if you asked most people on the forum they would say you are known for this. Not saying you havent posted about other things not related to this issue, but this seems to come up quite often.
I do think that there are alot of lazy people on here who just want things done for them but if you then enable them that is not helping and on top of that you bitch about them not thanking you. They will figure it out for themselves eventually and if not they wont be in business very long. It would be better to give them advice on how to do it, not do it for them.
I do think that there are alot of lazy people on here who just want things done for them but if you then enable them that is not helping and on top of that you bitch about them not thanking you. They will figure it out for themselves eventually and if not they wont be in business very long. It would be better to give them advice on how to do it, not do it for them.
PlasmaCam DHC2
Hypertherm Powermax 65
Millermatic 211 MIG Welder
Hypertherm Powermax 65
Millermatic 211 MIG Welder
-
- 2.5 Star Member
- Posts: 181
- Joined: Wed Sep 23, 2009 8:54 pm
- Location: Midcoast Maine
Re: Little help-Construction Sign
Right on Beefy!