Portable Band saw Table

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
vittonej
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Fri Feb 17, 2012 12:34 pm

Portable Band saw Table

Post by vittonej »

I have been reading and looking for a Portable band saw table, I made a weld able portband table, I used 1/4 inch material, but it would not have to be that thick, and I just bent it and welded it up. I have a Milwaukee portable band saw. I have pictures of the table but I cannot load them here is says they are to large of a files. But if you want to see pics send a message and I will send pics to an email. Hope some one can use.
Jay

Image
MLW Stand.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

noclinkers
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 95
Joined: Thu Jan 09, 2014 12:36 am

Re: Portable Band saw Table

Post by noclinkers »

Pictures of table. Thanks vittonej !

Image

Image
DezertBlingMoto
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 132
Joined: Sun Dec 08, 2013 3:53 pm

Re: Portable Band saw Table

Post by DezertBlingMoto »

any pics of how you mounted it ? Thanks a lot in advance for any pics an for the upload .
vittonej
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Fri Feb 17, 2012 12:34 pm

Re: Portable Band saw Table

Post by vittonej »

I marked and drilled a hole in front of the blade and secured a wing nut through the guide plate underneath, and countersunk the screw, just like the ones I researched.
DezertBlingMoto
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 132
Joined: Sun Dec 08, 2013 3:53 pm

Re: Portable Band saw Table

Post by DezertBlingMoto »

Thank You !! My friend has been asking me to cut him one so you came on the perfect timing thank you !!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”