Anyone Got a Burn Bin Design?

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
User avatar
johnp
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Fri Feb 24, 2017 10:22 am
Contact:

Anyone Got a Burn Bin Design?

Post by johnp »

Wondering if anyone has designed a burn bin that they might care to share? I bought a house in the country and I want to make something to burn stuff in like this....

Image

They sell on Amazon for about $350. This one is only 2' x 2' x 4' h. Ideally I'd like to build a 3x4x4h to have the additional volume. But if anyone has something they've used successfully in the past I'd love to give it a shot!
--------------------------------------------
Texas Metal Works
My Toys:
Rubner
1.5 Star Member
1.5 Star Member
Posts: 27
Joined: Mon Aug 21, 2017 1:03 pm

Re: Anyone Got a Burn Bin Design?

Post by Rubner »

following
1badcad509
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 10
Joined: Fri Jul 17, 2015 10:43 pm
Location: Missouri

Re: Anyone Got a Burn Bin Design?

Post by 1badcad509 »

Yes, I have one that I can share that I have sold locally. Similar design just without a bottom. I think this is my first share!

Image
burn box side b.svg

Image
burn box side a.svg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2566
Joined: Thu Jul 24, 2008 11:15 am

Re: Anyone Got a Burn Bin Design?

Post by plasmanewbie »

WOW! Awesome 1st share 1badcad509! Thanks!
User avatar
TimP
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 82
Joined: Sat Jan 31, 2015 2:42 pm
Location: Tyler, TX, USA

Re: Anyone Got a Burn Bin Design?

Post by TimP »

That's pretty nice. Thank you for the share.
Tim
1badcad509
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 10
Joined: Fri Jul 17, 2015 10:43 pm
Location: Missouri

Re: Anyone Got a Burn Bin Design?

Post by 1badcad509 »

No problem thanks guys. I drew this to cut on a 5x10 sheet of stainless. FYI
Precision Plasma 5x10
Bladerunner Ethercut
Hypertherm 65
Miller Syncro 200
Hobart Iron Man 250
Enco Mill
Enco Lathe
Pro Tools Bender
Jet Combo Slip Roll Finger Brake Shear
Dayton 9x16 saw
Kool Koat Powder gun
80w laser cutter
Baleigh 4ft finger brake
User avatar
johnp
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Fri Feb 24, 2017 10:22 am
Contact:

Re: Anyone Got a Burn Bin Design?

Post by johnp »

Thanks for the share 1badcad509! So, what thickness do you prefer to cut this out of? And is there a particular type of stainless you tend to use?
--------------------------------------------
Texas Metal Works
My Toys:
1badcad509
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 10
Joined: Fri Jul 17, 2015 10:43 pm
Location: Missouri

Re: Anyone Got a Burn Bin Design?

Post by 1badcad509 »

I have done these out of 14 gauge and try to get 304 if the steel house has it. I have cut a few for customers and they love it. I do a simple 2 piece lid so they can load it while burning. Just use 3/4" size holes in it and have tabs on the sides to keep them in place. Thanks Guys
Precision Plasma 5x10
Bladerunner Ethercut
Hypertherm 65
Miller Syncro 200
Hobart Iron Man 250
Enco Mill
Enco Lathe
Pro Tools Bender
Jet Combo Slip Roll Finger Brake Shear
Dayton 9x16 saw
Kool Koat Powder gun
80w laser cutter
Baleigh 4ft finger brake
User avatar
ETCWeld
3 Star Member
3 Star Member
Posts: 257
Joined: Sat Dec 16, 2017 10:45 pm

Re: Anyone Got a Burn Bin Design?

Post by ETCWeld »

I my be making one of these soon.
Thanks for sharing the file :Like
avengermike
1.5 Star Member
1.5 Star Member
Posts: 47
Joined: Fri Aug 16, 2019 9:32 am

Re: Anyone Got a Burn Bin Design?

Post by avengermike »

thanks for the share!
Joewillacker
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Sun Jan 20, 2019 8:29 am

Re: Anyone Got a Burn Bin Design?

Post by Joewillacker »

Anyone have this in a dxf file
cuttinparts
3 Star Member
3 Star Member
Posts: 351
Joined: Tue Sep 30, 2008 3:40 pm

Re: Anyone Got a Burn Bin Design?

Post by cuttinparts »

Joewillacker wrote: Tue Mar 03, 2020 9:32 am Anyone have this in a dxf file
See if this works for you. I combined both sides A and B from the original poster into 1 file.

SpeedBurn.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”