Electric Winch Mount Plat for movign steel

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
GEON
1 Star Member
1 Star Member
Posts: 14
Joined: Sun Jan 29, 2017 6:28 pm

Electric Winch Mount Plat for movign steel

Post by GEON »

Like many of us - I often have to move steel myself to load onto my table. I finally broke down and got a adjustable gantry crane system that straddles the table. I already had an 110v electric winch and wanted to mount that on the trolley to be able to both lift an move steel around to position it.

I designed a plate to go on the back mount of the winch. I happened to have some 16 gauge steel on the table so I cut out 4 of these and bolted it up...

I don't know if the winch mounting plates are standard or not - perhaps you can find use for this!

Here is the back of the winch:
Winchback.JPG
And the plate as designed:
WinchPlate.pdf
And 1 of 4 I cut:
Winchplate.JPG
I just stacked them up and used the bolts that came with the winch...
Her is the Winch attached to the trolley. It looks crooked but it straightens out with a load. I used a 3/4" bold to attach the winch to the trolley.

DXF file for the plate:
WinchPlate.dxf
I use corel draw. If you want the source file - just let me know.

G

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

GEON, on the left coast...

Arclight Dynamics 6000 Pro 5x5
Hypertherm 65
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”