Garden Sundial DXF FIle

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
User avatar
SCHIDTHEAD
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 276
Joined: Fri Jan 08, 2010 12:28 am
Location: Under a Hood

Garden Sundial DXF FIle

Post by SCHIDTHEAD »

Been pokin in on short grab and go's...been too busy to interact, but posted some pics tonight and thought id share the file of a sundial I have been selling while I was on. Enjoy and thanks for all the ideas, files, and input on here to every one of you who contribute...this files for you.

Image
Ivy Sundial.zip
Image

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: Garden Sundial

Post by muzza »

Thanks so much for that, fantastic piece as are most if not all of yours, your talents and efforts are much appreciated.

I'm not sure that I qualify :oops: for being eligible as I haven't really contributed may files but have tried to contribute with other help where possible. I have a few bits coming soon but I'm still a long way from creating a design like yours.

Thanks again
Murray
Terry
2.5 Star Member
2.5 Star Member
Posts: 178
Joined: Mon Aug 01, 2011 6:22 pm

Re: Garden Sundial

Post by Terry »

Excellent job thanks for sharing
metalart
4 Star Member
4 Star Member
Posts: 900
Joined: Thu Sep 03, 2009 10:43 am

Re: Garden Sundial

Post by metalart »

Verrry nice, thanks for sharing1
aicomp
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 233
Joined: Wed Feb 02, 2011 5:15 pm
Location: Santa Anna Texas
Contact:

Re: Garden Sundial

Post by aicomp »

Very nice. Thank You Very Much.
Mike
http://www.PenningtonFab.com
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
shalfpap
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 86
Joined: Wed Jul 13, 2011 6:15 pm

Re: Garden Sundial

Post by shalfpap »

VERY NICE!!! :mrgreen:
User avatar
hdfaster
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 501
Joined: Thu Jan 07, 2010 11:38 pm

Re: Garden Sundial

Post by hdfaster »

Great item, thank you!
mdoffroad
2 Star Member
2 Star Member
Posts: 94
Joined: Wed Mar 30, 2011 10:10 pm

Re: Garden Sundial

Post by mdoffroad »

This is very good work!!
User avatar
ctorres3120
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 612
Joined: Thu Dec 16, 2010 9:00 pm

Re: Garden Sundial

Post by ctorres3120 »

nice work :D thanks for sharing
Carlos
Last edited by ctorres3120 on Sun Apr 29, 2012 12:26 pm, edited 1 time in total.
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250

http://www.facebook.com/ctorresp?ref=tn_tnmn
User avatar
4R8
2.5 Star Member
2.5 Star Member
Posts: 167
Joined: Fri Jul 08, 2011 6:50 pm

Re: Garden Sundial

Post by 4R8 »

WOW, now that's awesome! Thanks a bunch for that!
User avatar
Diverdude
2 Star Member
2 Star Member
Posts: 65
Joined: Sun Jan 01, 2012 7:54 pm
Location: Alabama Gulfcoast

Re: Garden Sundial

Post by Diverdude »

Excellant work, thanks for sharing.
PlasmaRoute HD 4x4
Len Hamilton
1 Star Member
1 Star Member
Posts: 24
Joined: Wed Aug 31, 2011 11:34 am

Re: Garden Sundial

Post by Len Hamilton »

Thank you very much. Nice work. Do you mind telling us how much this sundial sells for? Len
User avatar
Sampson Jones
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 333
Joined: Mon Jul 25, 2011 9:30 pm

Re: Garden Sundial

Post by Sampson Jones »

Thanks !
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
User avatar
Buzzard Gut
3 Star Member
3 Star Member
Posts: 364
Joined: Mon Jun 27, 2011 2:07 pm
Location: Coos Bay Oregon

Re: Garden Sundial

Post by Buzzard Gut »

I have to agree with Murray! You do AWESOME work! And the posting part I to am guilty, I've not been able to work with my machine as much as I want for my real job gets in the way but I'll get something up in the near future. Again nice work and thanks for the file.

Bob
The older I get, The better it was!
ti4583
1.5 Star Member
1.5 Star Member
Posts: 28
Joined: Wed Mar 11, 2009 6:26 am

Re: Garden Sundial

Post by ti4583 »

very nice looking,is there any way someone could post it in dxf?my com. will not open the zip file
thanks
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Garden Sundial

Post by tnbndr »

in dxf?my com. will not open the zip file
If you download the file, then locate it in your windows explorer, click on the file to highlight, right click and select "extract here" the file will "unzip" to reveal the dxf file.
Don't know what version of windows you are runnning but unzip has been available forever.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
User avatar
Zippo
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1709
Joined: Fri Mar 04, 2011 12:49 pm
Location: Minnesota Based

Re: Garden Sundial

Post by Zippo »

nice project, thanks for sharing
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Garden Sundial

Post by tnbndr »

Thank you very much. Nice work. Do you mind telling us how much this sundial sells for?
I will repeat the question. How much do you sell these for? Are you powder coating or just rattle can spraying?

Thanks
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
bwgsmith
3.5 Star Member
3.5 Star Member
Posts: 548
Joined: Tue May 25, 2010 11:42 am

Re: Garden Sundial

Post by bwgsmith »

You wouldnt have that in a DXF file?
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Garden Sundial

Post by tnbndr »

The .zip contains the .dxf file. You need to download it and unzip it on your computer. The zip allows the compression of larger files for uploading.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
User avatar
SCHIDTHEAD
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 276
Joined: Fri Jan 08, 2010 12:28 am
Location: Under a Hood

Re: Garden Sundial

Post by SCHIDTHEAD »

tnbndr wrote:
Thank you very much. Nice work. Do you mind telling us how much this sundial sells for?
I will repeat the question. How much do you sell these for? Are you powder coating or just rattle can spraying?

Thanks
TNBNDR I am getting $320 for these raw, $360 prep'd and primered and $410 powdercaoted. They will test your welding geometry skills getting everything aligned, even and level, but I have it down to just at 2 hrs to piece them together with my new jig after removing millscale and a quick sand blast of all parts.
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
User avatar
SCHIDTHEAD
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 276
Joined: Fri Jan 08, 2010 12:28 am
Location: Under a Hood

Re: Garden Sundial

Post by SCHIDTHEAD »

Oh...and for all of you who are considerate enough to say thanks, you are more than welcome. I hope you can make more than a few bucks off this.

***ALSO--this dial is set at 38.85? N as with the gnomon, so if you want it to keep accurate time for your location, the dial angles and the gnomon have to be set to your latitude.
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
nuno115
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 95
Joined: Fri Dec 17, 2010 7:16 am

Re: Garden Sundial

Post by nuno115 »

Amazing. Thanks
I just wished someone makes one that I can use in NY....
GWS.Arkansas
2.5 Star Member
2.5 Star Member
Posts: 122
Joined: Fri Jun 10, 2011 6:30 pm

Re: Garden Sundial

Post by GWS.Arkansas »

great art work. but use corel 13 and when i try opening the file it pops up saying there was a virtual problem. can anyone help ?
Charlene
3 Star Member
3 Star Member
Posts: 470
Joined: Thu Mar 03, 2011 12:06 am
Location: Maine

Re: Garden Sundial

Post by Charlene »

Wow! Downloaded 246 times... :o

Thank you!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”