GEARS TO SHARE

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
s1lisboa
2 Star Member
2 Star Member
Posts: 88
Joined: Wed Aug 19, 2009 9:59 am

GEARS TO SHARE

Post by s1lisboa »

Team,

Enjoy !!!!! if you need a particular gear let me know I can help
Image
set01.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

bwgsmith
3.5 Star Member
3.5 Star Member
Posts: 548
Joined: Tue May 25, 2010 11:42 am

Re: GEARS TO SHARE

Post by bwgsmith »

Thanks for sharing.
stdave66
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 309
Joined: Sat Jan 01, 2011 1:47 pm
Location: Platteville, CO

Re: GEARS TO SHARE

Post by stdave66 »

Thanks!
User avatar
greenweanie
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 95
Joined: Thu Aug 27, 2009 11:06 pm

Re: GEARS TO SHARE

Post by greenweanie »

Here is a good free program to make sprockets...I used it to male my slip roller and it worked great...
http://www.idleamusements.com/Software/sprocketeer2.htm
User avatar
Zippo
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1709
Joined: Fri Mar 04, 2011 12:49 pm
Location: Minnesota Based

Re: GEARS TO SHARE

Post by Zippo »

Thanks for posting
reidy01
2.5 Star Member
2.5 Star Member
Posts: 171
Joined: Sun Aug 21, 2011 3:32 am

Re: GEARS TO SHARE

Post by reidy01 »

Thank you for sharing. ;)
nurv99
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sun Sep 27, 2015 7:45 pm

Re: GEARS TO SHARE

Post by nurv99 »

whats software are you using
flimmy
2 Star Member
2 Star Member
Posts: 67
Joined: Sat Feb 21, 2015 5:18 pm
Location: Mt. Pleasant

Re: GEARS TO SHARE

Post by flimmy »

Thanks
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: GEARS TO SHARE

Post by acourtjester »

You can also draw gears in Inkscape, I think you will need to download an additional add on (free too) :D
gears.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
rickjamesbish
2 Star Member
2 Star Member
Posts: 68
Joined: Sun Oct 30, 2016 8:46 pm

Re: GEARS TO SHARE

Post by rickjamesbish »

Used these to make sign for a client to display at local flea market, etc.. Modified the smaller gear a bit.
Image
OTHill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 573
Joined: Fri Jul 20, 2012 12:08 pm

Re: GEARS TO SHARE

Post by OTHill »

This is interesting. acourtjester can you elaborate on the terms used to describe a gear.Just went on to Inkscape and produced a gear in seconds.But no idea about the terms.Thanks.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: GEARS TO SHARE

Post by acourtjester »

First I must say I am not a machinist but have cut gears for my own use using a dividing head ( both mechanical and CNC method).
When you get to the gear window you must change one of the values for it to display a gear drawing. If you click on Live preview it will draw another gear with the changes, you will see both the original and the new gear.
Number of teeth will show the number of teeth on the gear it draws. The Circular pitch is a funny thing to get you head around. I have attached a few examples from Google. But it is a method of forming the diameter of the gear, it is a diameter that is in the middle of the tooth height for the gear. This will change with the number of teeth on the gear (pitch diameter) The last image shows the measurement of the circular pitch for a gear I drew with 4.5 as a value (I was slightly off with the positioning when measuring it should show 4.5") :lol: The pressure angle is standard at 20 in the US there was another used years ago which was 14.5. Diameter of center hole is just that what ever bore you want plug it in.
gear 1.jpg
gear 2.jpg
gear 3.jpg
gear 4.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
OTHill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 573
Joined: Fri Jul 20, 2012 12:08 pm

Re: GEARS TO SHARE

Post by OTHill »

Thanks acourtjester.I have used Sprocketeer and was wondering just lately how to design gears. Didn't realize it was that easy.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
plain ol Bill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 689
Joined: Fri Aug 15, 2008 6:22 pm
Location: Tenino,WA

Re: GEARS TO SHARE

Post by plain ol Bill »

Thanks guys - Sprocketeer was what I was looking for and could not remember the name.
Dang posted in the wrong place - oh well -----
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”