Bad Bug
-
Chopper John
- 3 Star Elite Contributing Member
- Posts: 392
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Bad Bug
Was going through my old files and when I saw this, it made me think of Oldsarge.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by Chopper John on Wed Jul 23, 2014 5:23 pm, edited 2 times in total.
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
-
muzza
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Bad Bug
Thanks John, looks nothing like Mike though 
I sent him a couple of files to help him with his VW show too.
Thanks
Murray
I sent him a couple of files to help him with his VW show too.
Thanks
Murray
-
Larry83301
- 5 Star Elite Contributing Member
- Posts: 2647
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Bad Bug
Nice file, thanks for sharing! 
Larry
Larry
-
large_time
- 2.5 Star Member
- Posts: 167
- Joined: Thu Dec 13, 2012 9:01 am
Re: Bad Bug
now that is a cool ride!
-
Outlawcnc
- 2.5 Star Member
- Posts: 104
- Joined: Thu Jul 12, 2012 4:40 pm
Re: Bad Bug
Thanks !!! i think of herbie
-
Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: Bad Bug
Very cool! I'll definitely be cutting one or five of those tomorrow! Thanks for the share! Still cutting and finishing for the show, expecting a big payday from that! Murray, never got the files you sent, just checked since I haven't been on in a bit... I sent you a file to check out as well, so I think I may not have the right addy for you? PM me!
Oldsarge
Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
-
muzza
- 4 Star Member
- Posts: 1472
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Bad Bug
My bad, I just checked my outbox and yes I sent them 26 days ago but to your email@hotmail, sorry.I've sent them now' hopefully not too late, have a great show.
Murray
-
cpstang1967
- 2 Star Member
- Posts: 90
- Joined: Sat Nov 17, 2012 9:39 pm
- Location: West Richland, WA
Re: Bad Bug
That's AWESOME. Wasn't even planning on cutting tomorrow, but I am now.
Thanks for sharing,
Cody
Thanks for sharing,
Cody
-
Largemouthlou
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Bad Bug
Reminds me of Herbie as well!!! LOL Thanks for the share
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
-
mayper
- 3 Star Member
- Posts: 268
- Joined: Tue Feb 07, 2012 1:46 am
- Location: Australia
- Contact:
Re: Bad Bug
thanks for sharing
-
Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: Bad Bug
Sweet, thanks for posting
-
Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
Re: Bad Bug
That one made me laugh, nice file,thanks for posting.
The older I get, The better it was!
-
Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: Bad Bug
Thanks again for the file, it cuts really nice! Cut 5 today!
Oldsarge
Oldsarge
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
-
sc6917
- 1.5 Star Member
- Posts: 45
- Joined: Wed Dec 19, 2012 4:22 pm
- Location: Nampa Idaho
Re: Bad Bug
Nice file, cut it out last night. Looks Great Thanks for sharing!
Sc6917
Sc6917
Dick Vander Meer
Nampa Idaho
Arclight Dynamics Arcpro 4800
Powermax 65
Nampa Idaho
Arclight Dynamics Arcpro 4800
Powermax 65
-
HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Bad Bug
Thank you I know who is getting this for Christmas already
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
Chopper John
- 3 Star Elite Contributing Member
- Posts: 392
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Re: Bad Bug
You are all welcome, glad you liked it! Thanks for posting the pic Mike....looks great!
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
-
WGTactical
- 1/2 Star Member
- Posts: 2
- Joined: Mon Jul 21, 2014 10:31 am
Re: Bad Bug
Does anyone know if this file is still shared here? Any help appreciated 
-
cbassjr
- 3 Star Member
- Posts: 307
- Joined: Fri Dec 21, 2012 5:21 pm
Re: Bad Bug
Where's the dxf???
-
Proballz03
- 3 Star Member
- Posts: 285
- Joined: Sun Dec 08, 2013 9:05 pm
Re: Bad Bug
Yea I was wondering where is the file too?, Like to have, thanks
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
-
Chopper John
- 3 Star Elite Contributing Member
- Posts: 392
- Joined: Mon Aug 24, 2009 10:22 pm
- Location: Crystal Lake, IL
- Contact:
Re: Bad Bug
File is back....
Chopper John
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
Mad City Cycles, Inc.
"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."
-
CNCCAJUN
- 4 Star Member
- Posts: 1108
- Joined: Mon Dec 26, 2011 11:38 pm
- Location: Baton Rouge, LA
Re: Bad Bug
Thank you . . .
Steve
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
-
grindergary
- 3.5 Star Elite Contributing Member
- Posts: 623
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
Re: Bad Bug
Thank you for the great file!
Gary
Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
-
WGTactical
- 1/2 Star Member
- Posts: 2
- Joined: Mon Jul 21, 2014 10:31 am
Re: Bad Bug
Thank you very much!
