new hypertherm in Sept on the way from a email??
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
new hypertherm in Sept on the way from a email??
Anyone have a clue what they are releasing at the end of September? I know Jim can't tell us but maybe a hint..hint..haha
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: new hypertherm in Sept on the way from a email??
What's it worth to you buddy
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: new hypertherm in Sept on the way from a email??
Lmfao
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
- 3.5 Star Elite Contributing Member
- Posts: 592
- Joined: Thu May 12, 2011 4:28 pm
Re: new hypertherm in Sept on the way from a email??
Looks like the new XP series that is 'said' to cut and also mark your material. I wonder if this will do away with air scribing.
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: new hypertherm in Sept on the way from a email??
If that's the case my 45 is going up for sale when this is releasedBTA Plasma wrote:Looks like the new XP series that is 'said' to cut and also mark your material. I wonder if this will do away with air scribing.
https://www.hypertherm.com/landing-page ... uage=en-US
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
- 3.5 Star Elite Contributing Member
- Posts: 592
- Joined: Thu May 12, 2011 4:28 pm
Re: new hypertherm in Sept on the way from a email??
I have been hearing that from others. This XP will replace the current 45. Sounds like they are making more power and capability
-
- 1.5 Star Member
- Posts: 34
- Joined: Mon Sep 19, 2011 12:35 pm
Re: new hypertherm in Sept on the way from a email??
Love to see a torch/consumable design similar to the 65 and up. Anything they drop will most likely be gold anyways.BTA Plasma wrote:I have been hearing that from others. This XP will replace the current 45. Sounds like they are making more power and capability
5x10 PPLLC GANTRY
PMX45
CANDCNC 620-4 OHMIC FEATHER TOUCH
VELOX Z AXIS WITH CUSTOM MOUNTS
SWAG FINGER BRAKE
ALPHATIG 200X
HOBART 210MVP
PMX45
CANDCNC 620-4 OHMIC FEATHER TOUCH
VELOX Z AXIS WITH CUSTOM MOUNTS
SWAG FINGER BRAKE
ALPHATIG 200X
HOBART 210MVP
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: new hypertherm in Sept on the way from a email??
Yep I hope its in the affordable market of my pocket book. I love there high density stuff. But know way I could ever afford it.
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: new hypertherm in Sept on the way from a email??
Ha ha......I have been running an "Alpha Prototype" in my shop for over a month.....for hand and cnc cutting. Love to tell you all more, but I do like my job! Soon we will hear. Here is the link to the site that will get you an email as soon as we are ready to talk about this product. Jim
www.hypertherm.com/ShapingXP
www.hypertherm.com/ShapingXP
-
- 3.5 Star Elite Contributing Member
- Posts: 522
- Joined: Fri Nov 14, 2008 10:20 am
Re: new hypertherm in Sept on the way from a email??
Jim, I was hoping you would chime in on this post. Unfortunately your reply was exactly what I expected, lol. Guess we will all have to wait.
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: new hypertherm in Sept on the way from a email??
Dang tease Jim..haha
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
- exapprentice
- 3 Star Member
- Posts: 357
- Joined: Mon Jul 06, 2015 1:57 pm
- Location: Wiltshire, UK
Re: new hypertherm in Sept on the way from a email??
I see the latest web site video is just as much a tease as the first video
https://www.hypertherm.com/landing-pages/shaping-xp/
I am sure what ever it is going to be it will be awesome with a price to match
lets hope it has loads of improvements for CNC cutting
my wish list for a new PM45 would be:
still single phase / CE availability
improved torch and consumable options for cutting thinner materials at sensible cutting speeds
same interface as the PM65 controls and connections
thicker material cutting capacity
improved duty cycle
just a wish list
https://www.hypertherm.com/landing-pages/shaping-xp/
I am sure what ever it is going to be it will be awesome with a price to match
lets hope it has loads of improvements for CNC cutting
my wish list for a new PM45 would be:
still single phase / CE availability
improved torch and consumable options for cutting thinner materials at sensible cutting speeds
same interface as the PM65 controls and connections
thicker material cutting capacity
improved duty cycle
just a wish list
Best Regards to all
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
-
- 3.5 Star Member
- Posts: 508
- Joined: Fri Apr 26, 2013 9:56 pm
Re: new hypertherm in Sept on the way from a email??
All I know by looking at the handle that it's a smaller unit. Most likely not a 65 or more.
Would be hard to give up my 65, I rarely cut more than 1/4" but the day I get rid of it....
Would be hard to give up my 65, I rarely cut more than 1/4" but the day I get rid of it....
-
- 3.5 Star Elite Contributing Member
- Posts: 592
- Joined: Thu May 12, 2011 4:28 pm
Re: new hypertherm in Sept on the way from a email??
The advertisement says portable so maybe this is the one with the integrated air compressor.
-
- 2 Star Member
- Posts: 85
- Joined: Sun Dec 27, 2015 8:02 am
Re: new hypertherm in Sept on the way from a email??
Everything in the lineup is a newer design except for the 45. Seems pretty obvious to me what it is. It's just the specs that are left to argue about. lol
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: new hypertherm in Sept on the way from a email??
It's a powermax 45 with built in compressor.
Hopefully it's dual voltage too
Hopefully it's dual voltage too
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: new hypertherm in Sept on the way from a email??
yeah... well I guess it's exciting, but I really doubt a built-in compressor on a 45 will be useful in the CNC world. I just cut a 1/3 sheet of various stuff and not even my 80gal compressor could keep up without the motor overheating.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
- exapprentice
- 3 Star Member
- Posts: 357
- Joined: Mon Jul 06, 2015 1:57 pm
- Location: Wiltshire, UK
Re: new hypertherm in Sept on the way from a email??
Is it a "Laser" Jim
Now that would be a really nice addition "a portable Laser" capable of cutting upto 12mm - 1/2 steel "interfaced to a DIY CNC table IF ONLY
only a thought
"Available 26.9.16 in North America and 10.10.16 in the rest of the world"
Now that would be a really nice addition "a portable Laser" capable of cutting upto 12mm - 1/2 steel "interfaced to a DIY CNC table IF ONLY
only a thought
"Available 26.9.16 in North America and 10.10.16 in the rest of the world"
Best Regards to all
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
-
- 3.5 Star Elite Contributing Member
- Posts: 592
- Joined: Thu May 12, 2011 4:28 pm
Re: new hypertherm in Sept on the way from a email??
Laser would be nice however the fumes are definitely toxic. Proper ventilation is absolutely a necessity and something that a lot of folks forget or dont mind much at all. Years ago (2005) there was a guy who had a CNC plasma in his garage (2 car) and he had zero ventilation. He spent 2 weeks in serious condition at a hospital as they were working on ways to pull the sludge out of his lungs. He was a smoker so that made him twice as a susceptible to lung damage.
- exapprentice
- 3 Star Member
- Posts: 357
- Joined: Mon Jul 06, 2015 1:57 pm
- Location: Wiltshire, UK
Re: new hypertherm in Sept on the way from a email??
Hi BTAPlasma
OK as you have said "Laser would be nice however the fumes are definitely toxic"
Lets change that to a PM45 "XP" thats a waterjet option with the same capacity as a PM65 I am sure that would be a nice option
I guess we will just have to wait and see "Available 26.9.16 in North America and 10.10.16 in the rest of the world" its like waiting for Christmas when you were a child
OK as you have said "Laser would be nice however the fumes are definitely toxic"
Lets change that to a PM45 "XP" thats a waterjet option with the same capacity as a PM65 I am sure that would be a nice option
I guess we will just have to wait and see "Available 26.9.16 in North America and 10.10.16 in the rest of the world" its like waiting for Christmas when you were a child
Best Regards to all
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
Exapprentice
(Pete)
10'x5' DIY table / PM 45XP + M/C Torch - Trying to add 4 axis Tube cutting
Linux/CommandCandCNC MP3600 / PN200 / DCP-01 / PWM
Solid Edge, Inkscape, SheetCam, Scananything & Andonstar USB Microscope
-
- 2.5 Star Member
- Posts: 142
- Joined: Thu Jan 31, 2013 11:40 am
Re: new hypertherm in Sept on the way from a email??
OK Jim it is the 26th somewhere in the world. Can you give us just a little tiny ity bitty morsel of info? Throw us a bone!
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: new hypertherm in Sept on the way from a email??
Mine works really well! Lets see......the on/off switch is on the front panel (not the back). I don't need to recycle the on/off switch when I change or inspect consumables. It has been in production for about a month.....so there should be adequate inventory for the demand (usually with new products the demand exceeds the supply...and customers must then wait). It does more than cut.... Tomorrow is the 26th here in New Hampshire....we will know more then! Jim
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: new hypertherm in Sept on the way from a email??
I'll be watching at MIDNIGHT. Take your vitamins and stay up late Jim. LOL
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 2.5 Star Member
- Posts: 148
- Joined: Fri Jan 15, 2010 7:32 pm
Re: new hypertherm in Sept on the way from a email??
Hey, did Jim just say it will have marking capability? Hope he doesn't get fired for letting that slipjimcolt wrote: It does more than cut.... Jim
-
- 2.5 Star Member
- Posts: 142
- Joined: Thu Jan 31, 2013 11:40 am
Re: new hypertherm in Sept on the way from a email??
Jim, it is the 26th. Wake up. Have a coffee and tell us what you have developed. What is this new machine?