Buy A Dynatorch Plasma Table

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
Dawgonhawg
3 Star Member
3 Star Member
Posts: 487
Joined: Sun Mar 27, 2011 10:13 pm

Buy A Dynatorch Plasma Table

Post by Dawgonhawg »

I would like to share my experience with everyone. I purchased a well used 5x10 Dynatorch table. It was one of the first machines produced by Dynatorch. This machine had one x axis motor. The machine was not maintained properly and needed some work. It may have been dropped or hit by a forklift. Not sure. I called Dynatorch before I bought it and ask about support for the machine. I was told "IF YOU HAVE A DYNATORCH MACHINE YOU HAVE SUPPORT FOREVER AT NO ADDITIONAL COST". WOW don't see that much. Anyway I talked to Jim in sales and told him my situation and I wanted to add upgrades to the machine. With his help and the tech specialist Russell I rebuilt the frame of the machine, added new software, slide (torch holder) new fiber optic cables, laser pointer, Ohmic Touch, new rack on one side of the machine, a second drive motor for the x axis and air cylinders to all drive motors. My machine now cuts like a new machine. This photo is the first piece cut after the upgrade. Oh yea, Holly in accounting did a wonderful job in sending me quotes in a timely manner. Also Leon helped me on the software changes for updating the machine and motor. Bottom line is I think you can have the best machine (like mine...) but what good is it if you have no support from the company. So buy A Dynatorch..
Thanks,Jim (Dawg)

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
jmsrbrt
3 Star Member
3 Star Member
Posts: 385
Joined: Mon Dec 08, 2008 5:24 pm
Location: San Marcos, TX
Contact:

Re: Buy A Dynatorch Plasma Table

Post by jmsrbrt »

Torchmate also has support for life.
Torchmate 2 with ATHC & Water table
Corel 12, Turbo Cad
TD Cutmaster 51
San Marcos, Texas
redfarm
2 Star Member
2 Star Member
Posts: 61
Joined: Mon Aug 09, 2010 10:51 pm

Re: Buy A Dynatorch Plasma Table

Post by redfarm »

I also purchased a used dynatorch and have been told the same thing by the Dynatorch staff. They have been very prompt, friendly, and helpful with any questions that I have asked. They were also very competent at their troubleshooting.
User avatar
AnotherDano
4 Star Member
4 Star Member
Posts: 806
Joined: Fri Dec 18, 2009 11:52 pm
Location: Laramie, Wyoming
Contact:

Re: Buy A Dynatorch Plasma Table

Post by AnotherDano »

Any business that doesn't 'get' the importance of customer service and the power of forums like this one - deserves to fail.
Doing the 'right thing' isn't that hard...
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
Dawgonhawg
3 Star Member
3 Star Member
Posts: 487
Joined: Sun Mar 27, 2011 10:13 pm

Re: Buy A Dynatorch Plasma Table

Post by Dawgonhawg »

Dano, you are absolutely correct but some companies just will not support there customers after a sale. I was surprised at the support and help I received. This machine was built in 2004. Most companies may have parts but getting the advise and tech support is another story for a machine this old.
Thanks, Dawg
Post Reply

Return to “Various Manufacturers Forum”