TATTERED AMERICAN FLAG
-
- 1 Star Member
- Posts: 11
- Joined: Wed Jan 15, 2014 2:45 pm
TATTERED AMERICAN FLAG
Does anyone happen to have the tattered American flag file in DXF format they wouldn't mind sharing ? Got a hometown hero I want to make one of these for please.
Thank You
Thank You
-
- 1 Star Member
- Posts: 20
- Joined: Tue Jun 30, 2015 11:56 am
Re: TATTERED AMERICAN FLAG
TATTERED AMERICAN FLAG
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 28
- Joined: Sat Jul 12, 2014 5:29 am
Re: TATTERED AMERICAN FLAG
Thanks for the file!
-
- 3 Star Member
- Posts: 273
- Joined: Sat Oct 06, 2012 7:16 pm
Re: TATTERED AMERICAN FLAG
Thank you for the file.
-
- 2 Star Elite Contributing Member
- Posts: 61
- Joined: Tue May 04, 2010 12:47 am
Re: TATTERED AMERICAN FLAG
Thanks for the file.
-
- 1.5 Star Member
- Posts: 37
- Joined: Tue Jul 07, 2015 10:09 pm
Re: TATTERED AMERICAN FLAG
LOVE IT!!!!! Thank you!!
-
- 3 Star Member
- Posts: 284
- Joined: Sun Dec 08, 2013 9:05 pm
Re: TATTERED AMERICAN FLAG
anyone have a tattered rebel flag?
PlasmaRoute "DO NOT BUY there Plasma table from this company NO Support"
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
Thermal Dynamics A-60
ArtCam
Sheet Cam
Mach3
Refrigerator dry Air
Charlotte,NC
https://www.facebook.com/pages/ACSD-Art ... 90?fref=ts
- d2day
- 2.5 Star Member
- Posts: 114
- Joined: Wed Sep 17, 2014 7:59 pm
Re: TATTERED AMERICAN FLAG
Thank you for the file.. I have a veteran in mind for this also. I appreciate your time and efforts in making and sharing the file.
Mach 3
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
SheetCam
Corel x5 / Version 12/ Version 7
ArtCam 7.0
CNC Router
ULS Laser
4x4 Plasma Table/Hand Built
HyperTherm PowerMax 45
Cut Shop Software
LCTHC
-
- 1.5 Star Elite Contributing Member
- Posts: 39
- Joined: Wed Jul 08, 2015 9:42 am
Re: TATTERED AMERICAN FLAG
Thank you for the file! Good work!
-
- 1 Star Member
- Posts: 19
- Joined: Tue Nov 03, 2015 2:24 am
Re: TATTERED AMERICAN FLAG
hey thanks man, any way i could get this in an svg?
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8032
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: TATTERED AMERICAN FLAG
Download Inkscape (free) you can open both DXF and SVG files formats then change them to the other when needed. Download the original file from here then convert it with Inkscape and save it in SVG.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Member
- Posts: 135
- Joined: Tue Mar 05, 2013 1:33 pm
- Location: South Haven, Mich.
Re: TATTERED AMERICAN FLAG
Thanks, claddagh.
I cut two right after your post. One went to a Army reunion as a door prize ( have not heard back yet). The other one went to the Blueberry Festival, and I had people almost fighting over it ( Ha! ). I wish that I cut a half dozen for the weekend . I did get a order for 3 and maybe a order to go to Texas. I did mod to the Stars ( not drop out ) and hung a Heart and Mich. to the bottom, torch heat the blue area and Bill's red dye.
Thanks Again,
Dale..........
I cut two right after your post. One went to a Army reunion as a door prize ( have not heard back yet). The other one went to the Blueberry Festival, and I had people almost fighting over it ( Ha! ). I wish that I cut a half dozen for the weekend . I did get a order for 3 and maybe a order to go to Texas. I did mod to the Stars ( not drop out ) and hung a Heart and Mich. to the bottom, torch heat the blue area and Bill's red dye.
Thanks Again,
Dale..........
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 19
- Joined: Tue Nov 03, 2015 2:24 am
Re: TATTERED AMERICAN FLAG
I tried opening it up in inkscape and it didnt work corectlyacourtjester wrote:Download Inkscape (free) you can open both DXF and SVG files formats then change them to the other when needed. Download the original file from here then convert it with Inkscape and save it in SVG.
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2632
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: TATTERED AMERICAN FLAG
ranger#1 wrote:I tried opening it up in inkscape and it didnt work corectlyacourtjester wrote:Download Inkscape (free) you can open both DXF and SVG files formats then change them to the other when needed. Download the original file from here then convert it with Inkscape and save it in SVG.
See if this will open for you.
Larry
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 19
- Joined: Tue Nov 03, 2015 2:24 am
Re: TATTERED AMERICAN FLAG
so,i got it to open in solid edge, re saved it as a .dxf then it would open in inkscape, then it would open in sheet cam, weird.
-
- 1 Star Member
- Posts: 19
- Joined: Tue Nov 03, 2015 2:24 am
Re: TATTERED AMERICAN FLAG
i wana do a big one like 5x10.
-
- 1 Star Member
- Posts: 20
- Joined: Thu Sep 29, 2016 11:16 pm
Re: TATTERED AMERICAN FLAG
Thank you I have been looking for this file or trying to recreate! I love this forum! I will be posting some of my designs!
- csplazma1
- 1.5 Star Member
- Posts: 33
- Joined: Thu Nov 19, 2015 12:00 pm
- Location: Bismarck ND
- Contact:
Re: TATTERED AMERICAN FLAG
I was able to cut of course you will need to clean it up or it will not cut properly. I just cut an 18x32 and it turned out pretty good. will adjust measurements as to not waste too much metal. We have never used patina colors and will be giving that a shot. For the new folks always check and double check your cut paths!! Tried Steel FX for the first time and highly recommend an air brush with the metal dyes. Used a cotton ball on this one and is ok. Here are the files.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by csplazma1 on Tue Nov 08, 2016 8:37 pm, edited 2 times in total.
C&S PlaZma Metal Works
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51
-
- 1.5 Star Member
- Posts: 25
- Joined: Wed Aug 17, 2016 3:39 pm
Re: TATTERED AMERICAN FLAG
Thank you for sharing. Very nice! JayG
PlasmaCam DHC2
Hypertherm Powermax 85
Miller EconoTig
Miller MIG
Lincoln MIG
Millwright Knee mill (older than me!)
LeBond Lathe (older than me!)
Hypertherm Powermax 85
Miller EconoTig
Miller MIG
Lincoln MIG
Millwright Knee mill (older than me!)
LeBond Lathe (older than me!)
-
- 1/2 Star Member
- Posts: 3
- Joined: Sat Sep 29, 2012 10:29 am
- Location: Moncks Corner,SC
Re: TATTERED AMERICAN FLAG
Incredible talent..... Thank You!!
- Serenityfab
- 1 Star Member
- Posts: 14
- Joined: Tue Dec 02, 2014 4:43 pm
- Location: Bozeman Montana
- Contact:
Re: TATTERED AMERICAN FLAG
Wow! There are some amazing artists on the Forum.
Thank you to everyone who help others to do better...
Thank you to everyone who help others to do better...
Serenity Metalworks
Bozeman, Montana
Plasmacam with homemade vent hood and Penn State dust collector
Hypertherm torch
It's not the size of your shop but what you do with the tools inside!
Bozeman, Montana
Plasmacam with homemade vent hood and Penn State dust collector
Hypertherm torch
It's not the size of your shop but what you do with the tools inside!
-
- 1 Star Member
- Posts: 19
- Joined: Thu Aug 18, 2016 7:55 am
Re: TATTERED AMERICAN FLAG
i can open this in bobcad, but it won't open in sheetcam it just keeps saying a problem has caused the program to stop working correctly, any suggestionsLarry83301 wrote:ranger#1 wrote:I tried opening it up in inkscape and it didnt work corectlyacourtjester wrote:Download Inkscape (free) you can open both DXF and SVG files formats then change them to the other when needed. Download the original file from here then convert it with Inkscape and save it in SVG.
See if this will open for you.
Larry
-
- 1 Star Member
- Posts: 19
- Joined: Thu Aug 18, 2016 7:55 am
Re: TATTERED AMERICAN FLAG
csplazma1 wrote:I was able to cut of course you will need to clean it up or it will not cut properly. I just cut an 18x32 and it turned out pretty good. will adjust measurements as to not waste too much metal. We have never used patina colors and will be giving that a shot. For the new folks always check and double check your cut paths!!Tried Steel FX for the first time and highly recommend an air brush with the metal dyes. Used a cotton ball on this one and is ok.
how did you like steel FX stuff?
- csplazma1
- 1.5 Star Member
- Posts: 33
- Joined: Thu Nov 19, 2015 12:00 pm
- Location: Bismarck ND
- Contact:
Re: TATTERED AMERICAN FLAG
Took a little to get used to and when they say airbrush is the best application they mean it. Only one issue I had was that my blue for what ever reason keeps coming out more aqua colored than blue. I am not getting the brilliant cobalt blue that I thought I would or as pictured in most of the pictures others post.
C&S PlaZma Metal Works
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51
LDR Motion Systems 4X8 Water Bladder
Hypertherm Powermax 85 Machine Torch
Everlast PowerPlasma 60 Handheld Torch
Thunder Laser NOVA 51