I need help converting this to a dxf. This is for a friend of mine that is special needs and wanted to give it for her ribbons
Help With angel wings
- Rem300wm
- 3 Star Elite Contributing Member
- Posts: 263
- Joined: Sat Feb 13, 2010 12:33 am
Re: Help With angel wings
Hello To All
Well the picture is no good, too small,so I draw this for You.At least will get You started.
Hope that It helps.
Rem.
Well the picture is no good, too small,so I draw this for You.At least will get You started.
Hope that It helps.
Rem.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by Rem300wm on Thu Feb 23, 2017 11:50 am, edited 1 time in total.
-
- 1/2 Star Member
- Posts: 4
- Joined: Fri Dec 04, 2015 2:14 pm
Re: Help With angel wings
Thanks for your help
- Rem300wm
- 3 Star Elite Contributing Member
- Posts: 263
- Joined: Sat Feb 13, 2010 12:33 am
Re: Help With angel wings
Hello to All
No Prob, glad to help.
Rem.
No Prob, glad to help.
Rem.
-
- 3 Star Elite Contributing Member
- Posts: 357
- Joined: Sun Jan 22, 2012 5:39 pm
Re: Help With angel wings
Looks good Rem. Just curious, what program did you use to convert? I use DesignEdge with my PlasmaCam and the picture works just fine.
K D Metal Werks
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
- Rem300wm
- 3 Star Elite Contributing Member
- Posts: 263
- Joined: Sat Feb 13, 2010 12:33 am
Re: Help With angel wings
Hello to All
KD i did not convert the image,it was too small and not a good trace came out of it,so i went and made it from scratch in Corel X7.I think it was faster this way to be honest.
Rem.
KD i did not convert the image,it was too small and not a good trace came out of it,so i went and made it from scratch in Corel X7.I think it was faster this way to be honest.
Rem.
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2648
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Help With angel wings
When you cut this file make sure you check the lettering, a couple of letters are missing!
Larry
Larry
- Rem300wm
- 3 Star Elite Contributing Member
- Posts: 263
- Joined: Sat Feb 13, 2010 12:33 am
Re: Help With angel wings
Hello to All
Larry ,You are very correct Sr.,sorry for not using my glasses,well got the problems corrected from the file and re uploaded it.
Like always check before you cut .
Rem.
Larry ,You are very correct Sr.,sorry for not using my glasses,well got the problems corrected from the file and re uploaded it.
Like always check before you cut .
Rem.