Eiffel Tower III

Plasma Cutters can be used to make some amazing products & projects. Upload some pictures of projects you've completed using your plasma cutter.
Post Reply
DXF
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1642
Joined: Tue Feb 22, 2011 5:15 pm
Location: Mountain City, Tennessee

Eiffel Tower III

Post by DXF »

The first picture shows a 5' tall Eiffel tower and a 7' tall one. I built the 5' tall tower out of 16 gage stainless steel and tig welded it together 15 years ago. I had just purchased my machine and wasn't sure if it would cut the holes accurate so I made another 7' tall tower and assembled it with (420) 10-32 screws about 6 years ago. The last picture shows a 5' tower I just finished building out of 14 gage and assembled with (418) 8-32 stainless steel screws. Major engineering change......eliminated (2) screws!

Dave Hanks
Attachments
Eiffel%20Tower%201.jpg
1.jpg
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8148
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Eiffel Tower III

Post by acourtjester »

You deserve a metal for perseverance, My hats off to you :)
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
shinertx
3 Star Member
3 Star Member
Posts: 290
Joined: Wed Aug 27, 2014 12:03 pm
Location: Shiner

Re: Eiffel Tower III

Post by shinertx »

awesome job Dave, now I would like to see your great talent on building the empire state building with lights keep up the great work.
Samson 5x10
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
RSB
1.5 Star Member
1.5 Star Member
Posts: 31
Joined: Tue Jan 10, 2017 10:17 pm

Re: Eiffel Tower III

Post by RSB »

Great job!
BAR M
3 Star Member
3 Star Member
Posts: 451
Joined: Thu Jul 11, 2013 8:46 pm
Location: NEW MEXICO

Re: Eiffel Tower III

Post by BAR M »

WOW!!!
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Eiffel Tower III

Post by SeanP »

Brilliant!
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
DXF
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1642
Joined: Tue Feb 22, 2011 5:15 pm
Location: Mountain City, Tennessee

Re: Eiffel Tower III

Post by DXF »

Thanks. When I sized the last one to 70% of the size of the 7' tall one the nuts would not fit so I had to redesign all corners and floors. Had to cut them all twice.....that sucked! I have already started gathering everything to build a leaning tower of Pisa. I plan to laser cut the latest Eiffel Tower design out of 14 gage stainless steel and light them up with solar powered LED lights.

Dave Hanks
chevybythesea
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 135
Joined: Tue Dec 08, 2015 1:06 am
Location: St. George, Utah

Re: Eiffel Tower III

Post by chevybythesea »

That is so cool! Did you draw that up, or find the plans somewhere?

Totally in awe - you have some fine talent.
5x10 ArcLight Dynamics Plasma table
http://www.thesteelyardinc.net
DXF
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1642
Joined: Tue Feb 22, 2011 5:15 pm
Location: Mountain City, Tennessee

Re: Eiffel Tower III

Post by DXF »

chevybythesea wrote:That is so cool! Did you draw that up, or find the plans somewhere?

Totally in awe - you have some fine talent.
Thanks, I purchased blue prints for a scroll saw design and scanned them in pieces......the entire drawing would not fit on my scanner 15 years ago. Then redrew the entire tower because the prints were not perfect. Made a lot of engineering changes and resized it. Took many hours. I'm not that talented but I am very determined!

Dave Hanks
User avatar
johnp
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Fri Feb 24, 2017 10:22 am
Contact:

Re: Eiffel Tower III

Post by johnp »

Fantastic work!
--------------------------------------------
Texas Metal Works
My Toys:
User avatar
Craig
3.5 Star Member
3.5 Star Member
Posts: 628
Joined: Mon Dec 24, 2012 3:43 pm

Re: Eiffel Tower III

Post by Craig »

Great job Dave do you have pictures of the lights?
Craig Johnson
DXF
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1642
Joined: Tue Feb 22, 2011 5:15 pm
Location: Mountain City, Tennessee

Re: Eiffel Tower III

Post by DXF »

Craig wrote:Great job Dave do you have pictures of the lights?
I will when I get it worked out.....although I would be under investigation if I post them for copyright infringement. :lol:


http://www.snopes.com/photographs-of-ei ... -at-night/

Dave
gamble
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Jan 02, 2014 6:33 pm

Re: Eiffel Tower III

Post by gamble »

I love this! Great work
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Mean Kitty
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Mon Jun 12, 2017 8:14 pm

Re: Eiffel Tower III

Post by Mean Kitty »

Those towers look awesome!!!! I'd love to make one of those, especially with lights :) The screws really add to the design too! Thats a lot of accurate drilling too. Any idea how many hours you have into the latest project?
DXF
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1642
Joined: Tue Feb 22, 2011 5:15 pm
Location: Mountain City, Tennessee

Re: Eiffel Tower III

Post by DXF »

Mean Kitty wrote:Those towers look awesome!!!! I'd love to make one of those, especially with lights :) The screws really add to the design too! Thats a lot of accurate drilling too. Any idea how many hours you have into the latest project?
Thanks, I have always loved the Eiffel Tower and now I have 3 of them. The holes were actually cut undersize on my machine and then re -drilled on my drill press to size. Not sure of the hours involved with cutting and assembly although probably have over 100 hours drawing and redrawing the dxf files. I could easily figure out the construction hours if someone wants to buy one. Haven't really tried to sell one yet but if terrorists ever attack the Eiffel Tower (I hope not) these might be worth some $. If you want to make one here are the plans I used and I won't sell or post my dxf files.

http://cherrytreetoys.com/eiffel-tower-clock-plan/

Dave Hanks
Evan
1 Star Member
1 Star Member
Posts: 21
Joined: Fri Jul 07, 2017 6:32 am

Re: Eiffel Tower III

Post by Evan »

totally class , seriously well done
weldnman
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Sun Jan 24, 2016 10:19 am

Re: Eiffel Tower III

Post by weldnman »

Awesome job.
User avatar
mbowers
1.5 Star Member
1.5 Star Member
Posts: 49
Joined: Tue Sep 10, 2013 12:24 pm
Location: At a Bar in Texas

Re: Eiffel Tower III

Post by mbowers »

Those are truly amazing!
My mind not only wanders, it sometimes leaves completely.

The world is full of people smarter than me...
Post Reply

Return to “CNC Plasma Cutter Project Picture Gallery”