3 D Stars
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 3 D Stars
DXF file please this is the sharing form!
Looks great
Looks great
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2 Star Member
- Posts: 53
- Joined: Mon Dec 31, 2012 3:44 pm
Re: 3 D Stars
awesome star ! but im not seeing the dxf if anyone could post it i would greatly appreciate it. i wish i was able to contribute but im still a newbie with the file drawing maybe hopefully someday i can return the favor.
-
- 2.5 Star Member
- Posts: 110
- Joined: Tue Jan 29, 2013 8:22 pm
Re: 3 D Stars
If you do a search their are several basic 3d stars in the file sharing section and you can simply add the other stars and circles or whatever you want to it and build your own version and then you can share it I just uploaded a 3d star a couple weeks ago so go find it and modify to your likings.
I do agree the original one in this post was very cool looking but why on earth would you want to do the exact same thing when you can customize your own in about 10 minutes
I do agree the original one in this post was very cool looking but why on earth would you want to do the exact same thing when you can customize your own in about 10 minutes
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 3 D Stars
I found the post with some info about the 3 d star here is some info I pulled from that download that may help.
See attached image with dimensions. Next DXF is of one part that can be opened in SheetCam and others added and aligned as needed. Along with adding cut outs inside as you like.
See attached image with dimensions. Next DXF is of one part that can be opened in SheetCam and others added and aligned as needed. Along with adding cut outs inside as you like.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- Scott Briggs
- 2 Star Member
- Posts: 56
- Joined: Thu Nov 15, 2012 4:03 pm
- Location: Rogersville, MO
- Contact:
Re: 3 D Stars
Scale to size bend to match, and wallah.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
5X10 PlasmaCam
Hypertherm 45
Hypertherm 85
Miller 252
Miller 212
Lincoln 215
Lincoln 185 Tig
100 ton Break Press
http://www.scooterbiltmanufacturing.com
Hypertherm 45
Hypertherm 85
Miller 252
Miller 212
Lincoln 215
Lincoln 185 Tig
100 ton Break Press
http://www.scooterbiltmanufacturing.com
-
- 2.5 Star Member
- Posts: 239
- Joined: Sun May 16, 2010 3:28 am
- GoingCustom
- 3.5 Star Elite Contributing Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: 3 D Stars
I had the dxf up for a long time in the original post, but I found two different companies claiming this file and another original I posted (and have since taken down) to be their own design. Or at least until I said something to them. I don't mind if files are used, but at least give credit where it's due or at the very least, don't claim them to be your own if you didn't draw it. It's a huge reason why I'm not on the forum very often anymore.Patrick Waite wrote:Gee travis all them picture and No DFX file of the one you made. wow
-
- 3 Star Member
- Posts: 491
- Joined: Fri Jun 05, 2009 7:09 am
- Location: New Jersey
- Contact:
Re: 3 D Stars
Does anyone have the file for the 3D star with the swirls and stars in it? Thanks
-
- 1 Star Member
- Posts: 14
- Joined: Sun Aug 30, 2015 6:27 pm
- Location: Ontario, Canada
Re: 3 D Stars
Great job. thanks for sharing!
-
- 3 Star Elite Contributing Member
- Posts: 357
- Joined: Sun Jan 22, 2012 5:39 pm
Re: 3 D Stars
I made mine using the formula on the math link. Worked perfect for me. It looked tougher to figure than it really is.
K D Metal Werks
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
-
- 1 Star Member
- Posts: 21
- Joined: Mon Oct 07, 2013 12:13 pm
- Location: Nottingham,UK
Re: 3 D Stars
Thank you for sharing sirScott Briggs wrote:Scale to size bend to match, and wallah.
-
- 1 Star Member
- Posts: 21
- Joined: Mon Oct 07, 2013 12:13 pm
- Location: Nottingham,UK
Re: 3 D Stars
Thank you kindlyacourtjester wrote:I found the post with some info about the 3 d star here is some info I pulled from that download that may help.
See attached image with dimensions. Next DXF is of one part that can be opened in SheetCam and others added and aligned as needed. Along with adding cut outs inside as you like.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 3 D Stars
Here is the file I used one is for the single point parts and the other is for 5 points parts.
I'm not crafty enough to bend the parts so I cut each piece for the points and tack them before assembly.
I'm not crafty enough to bend the parts so I cut each piece for the points and tack them before assembly.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: 3 D Stars
Thanks for reviving this thread. nice looking piece
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 1 Star Member
- Posts: 16
- Joined: Wed Mar 18, 2015 5:29 pm
Re: 3 D Stars
Thanks for the pattern!
-
- 1.5 Star Member
- Posts: 31
- Joined: Wed Sep 10, 2008 1:57 am
Re: 3 D Stars
Can someone help I don't see the file for the 3D stars
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 3 D Stars
If you are not a paying member you cannot see or download the files.
For the fee of $20 per year you can download all the posted files from here from the start in a singular function. (one at a time).
It may take a day for you membership to take effect
For the fee of $20 per year you can download all the posted files from here from the start in a singular function. (one at a time).
It may take a day for you membership to take effect
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1.5 Star Member
- Posts: 31
- Joined: Wed Sep 10, 2008 1:57 am
Re: 3 D Stars
where is the file? thanks if someone has the 3d star file
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: 3 D Stars
There are both DXF and SVG files above
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2 Star Elite Contributing Member
- Posts: 50
- Joined: Tue Nov 12, 2013 9:42 pm
Re: 3 D Stars
I'll add these. Drew them for Downtown Bozeman's Christmas decorations. Set to fly over main street again on Monday!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1/2 Star Member
- Posts: 8
- Joined: Tue Apr 18, 2017 3:04 am
Re: 3 D Stars
Is this file still available? I don't see the dl anywhere.
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2648
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: 3 D Stars
Just scroll up and you will find several files on this page.CHAOTiC WAYz wrote:Is this file still available? I don't see the dl anywhere.
Larry
http://plasmaspider.com/viewtopic.php?f ... ead#p77095
http://plasmaspider.com/viewtopic.php?f ... ad#p107286
-
- 1/2 Star Member
- Posts: 8
- Joined: Tue Apr 18, 2017 3:04 am
Re: 3 D Stars
Larry83301 wrote:Just scroll up and you will find several files on this page.CHAOTiC WAYz wrote:Is this file still available? I don't see the dl anywhere.
Larry
http://plasmaspider.com/viewtopic.php?f ... ead#p77095
http://plasmaspider.com/viewtopic.php?f ... ad#p107286
Wow, apparently i was on the wrong page. Didn't see any of these. thanks.
-
- 2 Star Member
- Posts: 52
- Joined: Mon Jun 06, 2016 2:58 pm
Re: 3 D Stars
I downloaded the first DXF file in this thread. What is the distance from the table to the middle of the star? Just wanting to figure out how to make it all fit together.
Thanks.
Thanks.
TruCut 5x10
Victor Plasma
Thermal Dynamics
Sheet Cam
Rhino3d
Bobcad
Victor Plasma
Thermal Dynamics
Sheet Cam
Rhino3d
Bobcad