Everlast 50S connector

Discussion forum for RazorWeld, Everlast, and all other plasma cutters.
Post Reply
msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

Everlast 50S connector

Post by msimpson99 »

I am looking for info on the connector that was included with the 50S plasma cutter. I have the connector wired and its working fine. I want to make a new cable so I need to order a new connector plug. Any info to help me narrow down my search.
msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

Re: Everlast 50S connector

Post by msimpson99 »

Never mind, I found them.

They are SP21-12 aviation connectors. You can get them on Amazon and Ebay.
Rodw
4 Star Member
4 Star Member
Posts: 780
Joined: Sun Aug 21, 2016 1:49 am
Location: Brisbane, Australia
Contact:

Re: Everlast 50S connector

Post by Rodw »

You did better than Everlast Australia. They emailed me asking if I could help them find the part for someone else!
msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

Re: Everlast 50S connector

Post by msimpson99 »

That's funny, I had contacted them for the information first. Its probably because of my request. :)

Their is a number on the connector SP-21. I just googled that end found you can get that connector in male of female form with 2-12 connectors. Some vendors are even selling a varity pack of them.

They are pretty good connectors as they are water proof with a seal. Keeps that shop dust out.
Rodw
4 Star Member
4 Star Member
Posts: 780
Joined: Sun Aug 21, 2016 1:49 am
Location: Brisbane, Australia
Contact:

Re: Everlast 50S connector

Post by Rodw »

Well you owe me beer then as their answer probably came from me....
msimpson99
2.5 Star Member
2.5 Star Member
Posts: 210
Joined: Wed May 04, 2016 2:31 pm
Contact:

Re: Everlast 50S connector

Post by msimpson99 »

Have not got a replay back from them yet. Probably wont until Monday.
Rodw
4 Star Member
4 Star Member
Posts: 780
Joined: Sun Aug 21, 2016 1:49 am
Location: Brisbane, Australia
Contact:

Re: Everlast 50S connector

Post by Rodw »

It was a while ago but I updated the details on this thread at the time.
https://plasmaspider.com/viewtopic.php?f=111&t=23700
Post Reply

Return to “RazorWeld, Everlast, & All Other Plasma Cutters”