Estop changes the way the table functions.
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 440
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Estop changes the way the table functions.
I moved my whole set up. Then had a hard drive go bad.I installed a new Mach3 disc and liscence.Now I do not get correct table movement. When I use my keyboard arrow keys. Most the time the z will up and down, most of the time the x and y don't move. But when i cycle the estop things change. It may work on the z or if I cycle again the x- may work or maybe the y+.When i say they work ,the z works as it should the x and y try to work. The hotkeys have been set as have the ports and pins.any ideas will be appreciated. Thanks.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7821
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Estop changes the way the table functions.
I have seen this before don't know why but this fixes it.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 440
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Re: Estop changes the way the table functions.
Thanks but i don't have that checked.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7821
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Estop changes the way the table functions.
I would try reloading Mach 3 you may want to get a fresh download from their site, I use version 067.
I would also rechech the motor output in the ports and pins table. You pins may be different for step and dir.
I would also rechech the motor output in the ports and pins table. You pins may be different for step and dir.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 4.5 Star Elite Contributing Member
- Posts: 1818
- Joined: Mon Jun 12, 2017 6:43 pm
Re: Estop changes the way the table functions.
post your XML profile you will need to zip it or change it's extension to upload
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 440
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Re: Estop changes the way the table functions.
Thanks guys i think we have found a bad board