help with lead in error
-
- 1 Star Member
- Posts: 18
- Joined: Sun Nov 01, 2020 12:45 pm
help with lead in error
How do I remove the lead in error on this design? I've tried to shorten and lengthen the lead ins and type and it doesn't clear it. How would I accomplish that thanks for the help.
4x4 Crossfire Pro Cnc Table
Hypertherm Powermax 45xp
ViaCad2D
Sheetcam
Hypertherm Powermax 45xp
ViaCad2D
Sheetcam
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1945
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: help with lead in error
I wouldn't worry about it. All it is telling you is that some of the geometry is too small to fit a lead in. It will still cut fine, it will just pierce and cut without the lead in where it won't fit. Set your lead in to approximately the thickness of the material and let er rip.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 1 Star Member
- Posts: 18
- Joined: Sun Nov 01, 2020 12:45 pm
Re: help with lead in error
Ok thank you !! Will do !!!
4x4 Crossfire Pro Cnc Table
Hypertherm Powermax 45xp
ViaCad2D
Sheetcam
Hypertherm Powermax 45xp
ViaCad2D
Sheetcam
-
- 3.5 Star Elite Contributing Member
- Posts: 719
- Joined: Wed Nov 26, 2014 1:22 pm
- Location: Fairfield, CT.
- Contact:
Re: help with lead in error
Do you really need an inside off set. I cut a lot of ornaments this year with names in them and I have found NO Offset works better with stuff like this.
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1945
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: help with lead in error
No offset makes the spaces between the cuts smaller since it's following the path and burning away part of the piece.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)