2.5 ton Wheels
-
- 1.5 Star Member
- Posts: 30
- Joined: Sat Feb 12, 2011 6:57 pm
2.5 ton Wheels
Made these wheels today, for 2.5 ton Rockwell axles
24x15" wheel, I cut the centers from 3/8", the centers are 22" dia.
total weight per wheel is 82#
Tire is "14.9x24" R2 tractor tire. 52"x15"
24x15" wheel, I cut the centers from 3/8", the centers are 22" dia.
total weight per wheel is 82#
Tire is "14.9x24" R2 tractor tire. 52"x15"
- Attachments
-
- 2.5twheel 004.jpg (159.04 KiB) Viewed 9182 times
-
- 2.5twheel 005.jpg (140.11 KiB) Viewed 9182 times
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 440
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Re: 2.5 ton Wheels
Nice job,have you got a good source for the blanks?Jim
-
- 1.5 Star Member
- Posts: 30
- Joined: Sat Feb 12, 2011 6:57 pm
Re: 2.5 ton Wheels
I have been looking for a deal.....trucks1948 wrote:Nice job,have you got a good source for the blanks?Jim
nothing yet, these blanks where $150 each from the local ag supply.
Seems the minimum for a price break is $5000
-
- 2 Star Member
- Posts: 51
- Joined: Tue Oct 06, 2009 7:52 pm
- Location: Northern NY
Re: 2.5 ton Wheels
Very nice. Are they for yourself or a customer? Hope you can post pictures of them mounted?!?
CandCNC Electronic
Hypertherm Powermax1000
Mach 3
Sheetcam
CorelDrawx5
LDR 4X8 table
Hypertherm Powermax1000
Mach 3
Sheetcam
CorelDrawx5
LDR 4X8 table
-
- 1.5 Star Member
- Posts: 30
- Joined: Sat Feb 12, 2011 6:57 pm
Re: 2.5 ton Wheels
they were for a customer, I'll try to get pics of them on the truck.Gogitter wrote:Very nice. Are they for yourself or a customer? Hope you can post pictures of them mounted?!?
- twicecustom
- 2.5 Star Member
- Posts: 155
- Joined: Sat Nov 06, 2010 3:50 pm
- Location: North Dakota
- Contact:
Re: 2.5 ton Wheels
Now thats rollin on dubs! Look nice!
Jack of all trades, Master of none.
Benjiman
Benjiman
-
- 3.5 Star Elite Contributing Member
- Posts: 520
- Joined: Fri Nov 14, 2008 10:20 am
Re: 2.5 ton Wheels
Just curious if these are for an off road vehicle or a passenger vehicle. Tires and wheels used on public roads on passenger vehicles must meet national highway traffic safety standards and be certified. Probably never would be a problem with it unless the vehicle was involved in an injury or fatality accident. Not picking on you, just thought you might want to know.I see spots wrote:they were for a customer, I'll try to get pics of them on the truck.Gogitter wrote:Very nice. Are they for yourself or a customer? Hope you can post pictures of them mounted?!?
Danny
-
- 1.5 Star Member
- Posts: 30
- Joined: Sat Feb 12, 2011 6:57 pm
-
- 3.5 Star Elite Contributing Member
- Posts: 520
- Joined: Fri Nov 14, 2008 10:20 am
Re: 2.5 ton Wheels
Duh! I guess if I would have paid attention to the picture I would have realized that! My bad.I see spots wrote:these are for "off-road only"
the tires are non D.O.T. tractor tires.
Hill And Hole !!!<----click
-
- 1.5 Star Member
- Posts: 30
- Joined: Sat Feb 12, 2011 6:57 pm
Re: 2.5 ton Wheels
got a pic of the truck
-
- 3 Star Member
- Posts: 495
- Joined: Sun Sep 12, 2010 11:18 pm
- Location: AZ
-
- 1.5 Star Member
- Posts: 30
- Joined: Sat Feb 12, 2011 6:57 pm
-
- 2.5 Star Elite Contributing Member
- Posts: 239
- Joined: Sun May 16, 2010 3:28 am
-
- 1/2 Star Member
- Posts: 6
- Joined: Tue Jan 31, 2012 9:42 pm
- Location: Lakeland
Re: 2.5 ton Wheels
any chance I could get a dxf file from you. I dont need the design. A friend of mine wants me to cut him out some designs for 2.5 tome 6 bolt rockwell wheels. Would appreciate the shortcut. Thanks gotee
-
- 1/2 Star Member
- Posts: 3
- Joined: Tue Jan 26, 2010 11:58 am
Re: 2.5 ton Wheels
Did anyone get a file on this yet if so i would like to have one
-
- 1.5 Star Member
- Posts: 30
- Joined: Wed Mar 22, 2017 7:32 pm
Re: 2.5 ton Wheels
Those turned out very nice. Im looking for centers just like that for a 14.9x24 R1 on 2.5 ton Rockwell top loaders. Anyway you be willing to share that file for those wheel centers?
-
- 1.5 Star Member
- Posts: 25
- Joined: Fri Jan 20, 2012 6:45 pm
- Location: SW Michigan
- Contact:
Re: 2.5 ton Wheels
I can draw those up if someone could give me dim. Looks. Like they are 6 on 8.75 but I need cen hole Dia, stud Dia, and od you want
96x120 BullTear (star labs) cnc table
Candcnc ether cut with dthc4
Hypertherm Powermax 85
Miller Xmt 350 MPa
Miller XR-30a
Miller S-54d feeder
Millermatic 350p with XR-Alumapro
http://www.borstmetalworks.com
http://www.facebook.com/BorstMetalWorks
Thanks
Candcnc ether cut with dthc4
Hypertherm Powermax 85
Miller Xmt 350 MPa
Miller XR-30a
Miller S-54d feeder
Millermatic 350p with XR-Alumapro
http://www.borstmetalworks.com
http://www.facebook.com/BorstMetalWorks
Thanks