THC replacement for Kyndill

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
Mcagg
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Thu Jul 20, 2023 9:21 am

THC replacement for Kyndill

Post by Mcagg »

Hi. We have a Torchmate table with Hypertherm 85 and a Kyndill THC. The Kyndill controller just quit working (nothing appears on the screen) and Kyndill is no longer in business. We’d like to replace the controller box but be able to keep the current lifter station and wiring if possible. I believe the Kyndill system uses raw arc voltage and a 9 pin serial cable runs to the lifter station. Looking for recommendations for an easy replacement. Thanks
weldguy
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2169
Joined: Fri Apr 17, 2009 11:48 am

Re: THC replacement for Kyndill

Post by weldguy »

That's a tough break. Not sure if you can keep the same lifter but I would reach to C&CNC and see what they have to offer. They have retrofit kits specifically for the Torchmate tables.
Post Reply

Return to “CNC Plasma Cutters General Forum”