Very nice custom upgrades. A bunch of disciplines in play with that job and all look fantastic. The design, engineering, tube bending, welds, function and finally the cool art. Well done
I have sold this pattern to a couple of local guys for $50. I sold the bumper on this job for $380 and have 4 others (one of his friends, one walk in who saw it and 2 from craigslist with a one time ad) on the line for me to build it for them once I can fit them in after the first of the year. I can almost guarantee that it will pay for itself once you advertise it or others see it on your unit. I will send the pattern file in a CAD .dxf only as I dont use a proprietary PlasmaCam Torchmate or other software. The file pattern will be blank; you plug in your patterns for customizing. or add $10 more for the bio-haz pattern I used on this one. I will send it with break/cut lines for easier bending (you fill with filler) or you can remove them to bend in a break following 1/8" notches in the cut lines to match the break to to keep your lines straight.
As much as I would like to share my files for free, as a business owner, I cant. I invest a lot of CAD time (and in this case measuring and a prototype cut) into all of my designs to make sure they work plasma friendly and cut ready for me the first time.
Feel free to let me know if you would like to have it, I can accept Paypal or CC
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776
AND ME TOO - on the bumper pattern! I think I can probably take your basic file and modify it enough to fit my 750 4-wheeler. I have been meaning to try to design one for some time now, but have not had the time, so this would save me a few steps.
