I have a student making this sign for Christmas and wants to put in an elk. But we can't find one that fits with the size of the sign. Help or any advice?
Personalized Elk and Mountain Sign
-
- 1/2 Star Member
- Posts: 4
- Joined: Tue Dec 19, 2023 11:01 am
Personalized Elk and Mountain Sign
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 5 Star Elite Contributing Member
- Posts: 2607
- Joined: Thu Jul 24, 2008 11:15 am
Re: We are trying to copy in an elk
If you could post your file in dxf or svg format you will open up to far more members here who can help you. Only Plasmacam folks can open your pcm file to see what your looking to do.
-
- 4 Star Elite Contributing Member
- Posts: 996
- Joined: Thu Nov 21, 2013 5:32 pm
Re: We are trying to copy in an elk
I looked at your sign. If the thickness of the border were reduced in width, an elk would fit better . It has to do with scale . I have elk that fit but the scale is wrong . Just keep the size the same but reduce the width of the lettering .
-
- 4 Star Elite Contributing Member
- Posts: 996
- Joined: Thu Nov 21, 2013 5:32 pm
Re: We are trying to copy in an elk
here ya go..this seems to fit better. You can increase the heighth of the bottom area if ya wanna add text some more detail
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1/2 Star Member
- Posts: 4
- Joined: Tue Dec 19, 2023 11:01 am
Re: We are trying to copy in an elk
Hey thanks for the help. I will try to load as a dxf file. I didn't see that it got saved as a pcm
-
- 4 Star Elite Contributing Member
- Posts: 996
- Joined: Thu Nov 21, 2013 5:32 pm
Re: We are trying to copy in an elk
here it is as dxf
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here