Hello Kitty

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
dwhittington
2.5 Star Member
2.5 Star Member
Posts: 140
Joined: Thu May 03, 2012 1:29 pm
Location: St Peters, MO

Hello Kitty

Post by dwhittington »

Little girls love them, I have made all of these for my step daughter. I used 1/8 wood and she gets to paint them. Dads get major kuddo's from your girls. I put them in a ZIP file, if you have any problems, I can send them separate.

Image
hello-kitty3.zip

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

metalart
4 Star Member
4 Star Member
Posts: 900
Joined: Thu Sep 03, 2009 10:43 am

Re: Hello Kitty

Post by metalart »

Thanks for sharing!
rkeytek
2 Star Member
2 Star Member
Posts: 70
Joined: Fri Jun 17, 2011 8:41 pm

Re: Hello Kitty

Post by rkeytek »

Thanks for sharing. What did you use to convert these?
Note for others- They are not ready for cutting.
dwhittington
2.5 Star Member
2.5 Star Member
Posts: 140
Joined: Thu May 03, 2012 1:29 pm
Location: St Peters, MO

Re: Hello Kitty

Post by dwhittington »

I used Adobe Illustrator to convert, then plot out on my CAD table. I am in the box industry so I'm usually just drawing them, but hope to get into plasma cutting in the future.
metalart
4 Star Member
4 Star Member
Posts: 900
Joined: Thu Sep 03, 2009 10:43 am

Re: Hello Kitty

Post by metalart »

I couldn't open the gators, I opened the cobra though, so I thought I'd try downloading these, they didn't open for me either. Not sure if they're too big for some of us to open or ????
dwhittington
2.5 Star Member
2.5 Star Member
Posts: 140
Joined: Thu May 03, 2012 1:29 pm
Location: St Peters, MO

Re: Hello Kitty

Post by dwhittington »

Sorry. OK, I re-did the export, Try these.
HELLO-KITTY.zip

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Cotton
2 Star Member
2 Star Member
Posts: 78
Joined: Wed Aug 31, 2011 1:35 pm

Re: Hello Kitty

Post by Cotton »

Made this one more plasma friendly, thanks dwhittington for the files! On a side note is anyone else getting a bunch of double lines on these files? What is the cause of this?

Image
HELLO KITTY COLORING (16).DXF

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

dwhittington
2.5 Star Member
2.5 Star Member
Posts: 140
Joined: Thu May 03, 2012 1:29 pm
Location: St Peters, MO

Re: Hello Kitty

Post by dwhittington »

Sorry Cotton, I didn't check them before exporting.
alleykat
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Tue Dec 20, 2011 3:55 am
Location: Houston,TX

Re: Hello Kitty

Post by alleykat »

Cotton wrote:Made this one more plasma friendly, thanks dwhittington for the files! On a side note is anyone else getting a bunch of double lines on these files? What is the cause of this?
Now my gf can leave me alone after I cut her out a dam hello kitty!!! :lol:

Im still trying to figure out how I wanna get this one to cut. http://www.ohiofusion.com/wp-content/up ... _alone.jpg
PlasmaRoute Blaze HD 4x4
Thermal Dynamics Cutmaster A60
alleykat
1.5 Star Member
1.5 Star Member
Posts: 35
Joined: Tue Dec 20, 2011 3:55 am
Location: Houston,TX

Re: Hello Kitty

Post by alleykat »

Had some lead in issues on the left whisker but kinda looks like it belongs there.

Image

Thanks guys.
PlasmaRoute Blaze HD 4x4
Thermal Dynamics Cutmaster A60
metalart
4 Star Member
4 Star Member
Posts: 900
Joined: Thu Sep 03, 2009 10:43 am

Re: Hello Kitty

Post by metalart »

Thanks dwhittington, putting it into the zip file did it! I appreciate you taking the time to convert it to zip!!
reidy01
2.5 Star Member
2.5 Star Member
Posts: 171
Joined: Sun Aug 21, 2011 3:32 am

Re: Hello Kitty

Post by reidy01 »

Ah my Daughter will love one of these, Thanks for sharing! :D ;)
serega911
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Fri Mar 31, 2017 4:39 am

Re: Hello Kitty

Post by serega911 »

Hello, new user how do i download this dxf ?
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Hello Kitty

Post by Larry83301 »

In the first post where it says attachments just click on the DXF file.


Larry
serega911
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Fri Mar 31, 2017 4:39 am

Re: Hello Kitty

Post by serega911 »

Larry83301 wrote:In the first post where it says attachments just click on the DXF file.


Larry
That's what he writes in the first post - "You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members"

I do not have rights, You can send me the archive to the mail mason155@mail.ru
many thanks
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Hello Kitty

Post by Larry83301 »

serega911 wrote:
Larry83301 wrote:In the first post where it says attachments just click on the DXF file.


Larry
That's what he writes in the first post - "You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members"

I do not have rights, You can send me the archive to the mail mason155@mail.ru
many thanks
Like it says - - -
"You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members"


No one should send you the file. If you want the files on this forum then join in, pay the money and you can gain all the benefits that this forum has to offer! :D :D

Larry
User avatar
ETCWeld
3 Star Member
3 Star Member
Posts: 257
Joined: Sat Dec 16, 2017 10:45 pm

Re: Hello Kitty

Post by ETCWeld »

Cotton wrote: Fri May 04, 2012 2:50 pm Made this one more plasma friendly, thanks dwhittington for the files! On a side note is anyone else getting a bunch of double lines on these files? What is the cause of this?
HELLO KITTY COLORING (16).DXF
I know this is an old thread, but I have a brand new problem (other than that I actually came here looking for a hello kitty file :HaHa ) .
I downloaded the dxf file and I can interact/ edit the file (thanks :Like ). I downloaded the zip file and opened it and when I click on those dxf files they did too... kind of. I could see the img as if it were on a sheet of steel with the cuts already made, but as soon as I click on anything it disappears. I can't seem to do anything with any of them. The only way I have been able to do anything is to take a screenshot, paste it into paint.net ( :Like https://www.youtube.com/watch?v=xEzVGRx ... e=youtu.be). then I bring it back into my torchmate cad file and fix it the rest of the way.

I managed to get something my student will like (I think) I was just courious if anyone else has the same problem or any other info on it.
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

Re: Hello Kitty

Post by SegoMan DeSigns »

I just opened a couple of those files and found a lot of double lines myself, sounds like you have a workaround.
User avatar
ETCWeld
3 Star Member
3 Star Member
Posts: 257
Joined: Sat Dec 16, 2017 10:45 pm

Re: Hello Kitty

Post by ETCWeld »

thanks.
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Hello Kitty

Post by weldguy »

ETCWeld, I opened a couple of the dxf's from the zip folder and same as SegoMan I see the double lines. Basically 2 of everything directly on top of each other. When I went to delete one of the doubles everything dissapeared also and I found that was because all the objects were grouped. In Corel I un-grouped everything and was able to 1 by 1 delete all the doubles. Hope this saves you time because bringing these dxfs into Paint your essentially re-drawing/tracing whats already been done. Hopefully this saves you some time and hopefully your CAD software (not sure what your using) will allow you to un-group these.
User avatar
ETCWeld
3 Star Member
3 Star Member
Posts: 257
Joined: Sat Dec 16, 2017 10:45 pm

Re: Hello Kitty

Post by ETCWeld »

:Like :Like :Like :Like Awesome! Alls I had to do before doing anything else, was ungroup it like you said. Man that is so much easier. THANK YOU!
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Hello Kitty

Post by weldguy »

ETCWeld wrote: Sun May 26, 2019 7:57 pm :Like :Like :Like :Like Awesome! Alls I had to do before doing anything else, was ungroup it like you said. Man that is so much easier. THANK YOU!
Awesome, glad that worked for you :Like
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”