In need of a fanned out turkey tail
-
- 2.5 Star Member
- Posts: 122
- Joined: Fri Jun 10, 2011 6:30 pm
In need of a fanned out turkey tail
I am needing a turkey tail that is fanned out. I found a few turkey on here but would like just the fanned tail. Any help would be great. Thanks
-
- 3 Star Member
- Posts: 491
- Joined: Fri Jun 05, 2009 7:09 am
- Location: New Jersey
- Contact:
Re: In need of a fanned out turkey tail
Here's one
- Weldtutor
- 2 Star Member
- Posts: 91
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Ontario Canada
Re: In need of a fanned out turkey tail
The attached DXF has separate fanned tail & body section that can be used to assemble the turkey shown in the photo.
Together they make an interesting decoration for the Thanksgiving season.
Taken apart, they are flat for storage.
Together they make an interesting decoration for the Thanksgiving season.
Taken apart, they are flat for storage.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
Re: In need of a fanned out turkey tail
DARRY21270 Your to much.....
The older I get, The better it was!
-
- 2.5 Star Member
- Posts: 122
- Joined: Fri Jun 10, 2011 6:30 pm
Re: In need of a fanned out turkey tail
that is neat looking the wife is wanting me to cut one of those for the kitchen table. thanks for that one . but not really what i was needing Would like a fairly detailed turkey tail fanned out so that I can put in an oval with the guys name around it. Anyone have something like that.. Thanks for the help
-
- 4 Star Member
- Posts: 900
- Joined: Thu Sep 03, 2009 10:43 am
Re: In need of a fanned out turkey tail
Not sure if this is what you're looking for, hope it helps.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 122
- Joined: Fri Jun 10, 2011 6:30 pm
Re: In need of a fanned out turkey tail
Yes that will be perfect. Thanks to all of you for your help with this.
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: In need of a fanned out turkey tail
This tail is 3D turkeys, I hope it works for you.
Carlos
Carlos
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn