Help with logo
-
- 1/2 Star Member
- Posts: 4
- Joined: Wed Sep 19, 2012 11:05 pm
Help with logo
does anyone have a Texas Tech logo. looking for one to cut out for bookends for my desk at work. thanks in advance.
-
- 1.5 Star Member
- Posts: 49
- Joined: Sat Jul 10, 2010 12:25 pm
Re: Help with logo
I have it in a plasma cam file. Would you like it?
-
- 2 Star Elite Contributing Member
- Posts: 54
- Joined: Sun Oct 21, 2012 1:40 pm
- Location: Idaho Falls/Pocatello, ID
Re: Help with logo
The logo is a copyrighted trademark but TTU have guideline for use
http://www.depts.ttu.edu/communications ... uble-t.php
cut all the pieces and stack and weld, or separate by 1/2 in and get a 3d-ish look or whatever you want.
remember to follow the TTU guidelines. For personal use only, not marketable without permission, see web page above.
http://www.depts.ttu.edu/communications ... uble-t.php
cut all the pieces and stack and weld, or separate by 1/2 in and get a 3d-ish look or whatever you want.
remember to follow the TTU guidelines. For personal use only, not marketable without permission, see web page above.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1/2 Star Member
- Posts: 4
- Joined: Wed Sep 19, 2012 11:05 pm
Re: Help with logo
Thanks for all your help i cant open here at work but ill check it out when i get home. and yes i will follow the guidlines the cut out is for my personal use only. i will post some pics when i get it cut out....