Actually my regional manager at the day gig... She's collected M&Ms stuff for years and ordered this for her collection... A fun project but a lot of detail work!
Oldsarge
For an M&Ms collector...
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
For an M&Ms collector...
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
- elvenhome21
- 2.5 Star Member
- Posts: 138
- Joined: Tue Oct 30, 2012 11:53 am
- Craig
- 3.5 Star Member
- Posts: 628
- Joined: Mon Dec 24, 2012 3:43 pm
Re: For an M&Ms collector...
Turned out great Oldsarge, Mr yellow is my favorite too. Craig Johnson
Craig Johnson
- modelaratrod
- 2 Star Member
- Posts: 86
- Joined: Tue Jul 23, 2013 12:41 pm
- Location: Colorado
Re: For an M&Ms collector...
I'm so making one for my sister's B-Day!!! any more pics/ details?
5x10 Torchmate 2 w/AVHC
Hypertherm PM85 w/ machine & hand torch.
Hypertherm PM85 w/ machine & hand torch.
- Oldsarge
- 3.5 Star Member
- Posts: 636
- Joined: Tue Feb 22, 2011 10:12 am
- Location: Lacey, WA
Re: For an M&Ms collector...
modelaratrod wrote:I'm so making one for my sister's B-Day!!! any more pics/ details?
Sorry, this is the only pic I took.... because of the subject matter I didn't post the file, this was made for my boss at work as a one-off piece..... I basically downloaded a picture of Yellow, and hand traced the whole thing.... the dish was a rubbish bin toss away I found and was using for nuts & bolts, and on a whim decided to add it to the design.... I may do one more for my theater room, but it's pretty time consuming with all the masking for different colors...
Oldsarge
6x12 Home Built Table
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
Hypertherm PowerMax 85
CandCNC Dragon Cut 620 DTHC IV
CorelDraw X7, Sheetcam, Mach 3
"Better to attempt great things and fail than to live in the gray twilight where there is neither victory or defeat"
- BrianMick
- 4 Star Elite Contributing Member
- Posts: 999
- Joined: Sun Dec 06, 2009 8:00 am
- Location: St. Cloud,Minnesota United States of America
- Contact:
Re: For an M&Ms collector...
Lets just say hypothetically if you posted the "green" m&m, It would not be the same one off piece...would you do it? Green is my favorite......
Brian
Brian
BrianMick
www.midwayiron.com
www.midwayiron.com
-
- 1 Star Member
- Posts: 13
- Joined: Tue Apr 27, 2010 3:38 am
Re: For an M&Ms collector...
That looks great. I love M&M stuff too.
Homebuilt Table. Mach3 SheetCam Hobart 780 Plasma