Fighting Cock puzzle
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Fighting Cock puzzle
these cockfighting is part of my culture
not finished
Carlos
not finished
Carlos
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- Craig
- 3.5 Star Member
- Posts: 628
- Joined: Mon Dec 24, 2012 3:43 pm
Re: Fighting Cock puzzle
Very creative Carlos, look forward to seeing it finished. Craig Johnson
Craig Johnson
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Fighting Cock puzzle
Very nice. What program are you using to sketch that up?
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2.5 Star Elite Contributing Member
- Posts: 161
- Joined: Wed Dec 21, 2011 4:43 pm
Re: Fighting Cock puzzle
Carlos you are one talented fellow! Great job!
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Fighting Cock puzzle
Thanks Craig, thanks Conradestrada.tnbndr wrote:Very nice. What program are you using to sketch that up?
tndr, the program I use is Autocad.
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
-
- 2 Star Member
- Posts: 93
- Joined: Wed May 02, 2012 11:42 am
Re: Fighting Cock puzzle
Carlo that is awesome. I'm into 3d anything. That is very good.
Thanks
Thanks
-
- 2.5 Star Member
- Posts: 210
- Joined: Sun Mar 17, 2013 9:14 am
Re: Fighting Cock puzzle
I hate to ask after all the hard work you put in to these, but you wouldn't mind sharing the DXF file would you?
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Fighting Cock puzzle
when I finish762frmafr wrote:I hate to ask after all the hard work you put in to these, but you wouldn't mind sharing the DXF file would you?
Carlos
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
-
- 2.5 Star Member
- Posts: 210
- Joined: Sun Mar 17, 2013 9:14 am
Re: Fighting Cock puzzle
ctorres3120 wrote:when I finish762frmafr wrote:I hate to ask after all the hard work you put in to these, but you wouldn't mind sharing the DXF file would you?
Carlos
Thank you.
-
- 2.5 Star Member
- Posts: 215
- Joined: Wed Oct 24, 2012 10:29 am
- Location: Auburn, AL
- Contact:
Re: Fighting Cock puzzle
Just awesome. Just dawned on me that thing even balances. WOW!!
Precision Plasma 4x8 v-rail
C&CNC dragon cut 620
Hypertherm Powermax 45
Auburn, AL
www.facebook.com/decorativemetalworks
C&CNC dragon cut 620
Hypertherm Powermax 45
Auburn, AL
www.facebook.com/decorativemetalworks
- mike66
- 2.5 Star Member
- Posts: 114
- Joined: Wed Aug 31, 2011 4:13 pm
- Location: Bay Minette, Alabama
- Contact:
Re: Fighting Cock puzzle
Very nice Carlos
Mike
Mike
-
- 1.5 Star Member
- Posts: 47
- Joined: Tue Feb 14, 2012 12:05 pm
Re: Fighting Cock puzzle
Awesoms, I'm totally in love with your creations!!!
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Fighting Cock puzzle
the balance is a magnet that is under the legdustywill wrote:Just awesome. Just dawned on me that thing even balances. WOW!!
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Fighting Cock puzzle
final steps, some more shades and base that will hold
Carlos
Carlos
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Fighting Cock puzzle
completed
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7801
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Fighting Cock puzzle
Great to see how to move picture to metal.
And making slight change to produce 2 poses of the fighting cock.
Very nice Thanks
And making slight change to produce 2 poses of the fighting cock.
Very nice Thanks
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Elite Contributing Member
- Posts: 161
- Joined: Wed Dec 21, 2011 4:43 pm
Re: Fighting Cock puzzle
great depiction Carlos you are a very talented person, thanks for sharing!
-
- 2.5 Star Member
- Posts: 210
- Joined: Sun Mar 17, 2013 9:14 am
Re: Fighting Cock puzzle
Would love to have the DXF for these.
-
- 1/2 Star Member
- Posts: 8
- Joined: Sat Oct 19, 2019 5:17 pm
Re: Fighting Cock puzzle
Man this is amazing. I would also love to have the DXF file for this one day.