A little something to get you into the Holiday Spirit
-
- 3 Star Member
- Posts: 251
- Joined: Mon Jun 20, 2011 9:12 am
- Location: Cache, Oklahoma
A little something to get you into the Holiday Spirit
3 Christmas ornaments I cut today, and dyed with STEEL-FX DYE.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
PlasmaRoute CNC 4 x 4
Corel Draw X5
SheetCam
Baileigh 12 gauge 40 inch box brake
Corel Draw X5
SheetCam
Baileigh 12 gauge 40 inch box brake
-
- 3 Star Member
- Posts: 251
- Joined: Mon Jun 20, 2011 9:12 am
- Location: Cache, Oklahoma
Re: A little something to get you into the Holiday Spirit
Here's a pic of the Angel Ornament with Steel-FX yellow dye.
PlasmaRoute CNC 4 x 4
Corel Draw X5
SheetCam
Baileigh 12 gauge 40 inch box brake
Corel Draw X5
SheetCam
Baileigh 12 gauge 40 inch box brake
-
- 3.5 Star Member
- Posts: 541
- Joined: Sun Feb 10, 2013 3:13 pm
- Location: mich.
Re: A little something to get you into the Holiday Spirit
Nice,
Thanks for posting
Thanks for posting
Arclight 4x4
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
hypertherm 65
corel x6
mach 3, sheet cam
miller 211 auto set
-
- 2 Star Member
- Posts: 55
- Joined: Sun Jul 28, 2013 3:41 pm
- Location: Hollywood, MD
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Jan 02, 2013 10:06 pm
Re: A little something to get you into the Holiday Spirit
Thanks these are great. How are you applying the dye from steel FX? I tried the brown but it did not look as good as yours, it dried instantly and tended to be streaky.
-
- 3.5 Star Member
- Posts: 548
- Joined: Tue May 25, 2010 11:42 am
Re: A little something to get you into the Holiday Spirit
Thanks for sharing.
-
- 3 Star Member
- Posts: 251
- Joined: Mon Jun 20, 2011 9:12 am
- Location: Cache, Oklahoma
Re: A little something to get you into the Holiday Spirit
For these I am using a small paint brush, appying the dye and following the stroke until the brush completly runs out of dye, I make sure my brush is not saturated, wipe it on the bottle both sides first so it will not be so runny. It takes very little dye to cover this, in most cases cannot even tell it has dye on it, one you shoot it with clear the color pops out.aweston wrote:Thanks these are great. How are you applying the dye from steel FX? I tried the brown but it did not look as good as yours, it dried instantly and tended to be streaky.
I tried another ornament in orange, and the application was not as nice as the yellow. I have also airbrushed bigger pieces but my airbrush system is not the best and it over coats using way too much dye.
PlasmaRoute CNC 4 x 4
Corel Draw X5
SheetCam
Baileigh 12 gauge 40 inch box brake
Corel Draw X5
SheetCam
Baileigh 12 gauge 40 inch box brake
-
- 2.5 Star Member
- Posts: 235
- Joined: Wed May 18, 2011 11:05 am
Re: A little something to get you into the Holiday Spirit
Very nice.
Thanks
Thanks
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
Re: A little something to get you into the Holiday Spirit
Cool, Thanks
The older I get, The better it was!
- Zippo
- 4.5 Star Elite Contributing Member
- Posts: 1709
- Joined: Fri Mar 04, 2011 12:49 pm
- Location: Minnesota Based
Re: A little something to get you into the Holiday Spirit
Thanks for posting.
-
- 1 Star Member
- Posts: 21
- Joined: Sat Jul 14, 2018 7:43 pm
-
- 4 Star Member
- Posts: 1008
- Joined: Mon May 21, 2012 3:58 pm
- Location: spanaway wa.
Re: A little something to get you into the Holiday Spirit
Thanks
They look great.
Jim
They look great.
Jim
- david jordan
- 3.5 Star Elite Contributing Member
- Posts: 671
- Joined: Sun Jul 06, 2014 2:21 pm
Re: A little something to get you into the Holiday Spirit
Thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220