LED backlit wall signs
-
- 1 Star Member
- Posts: 11
- Joined: Mon Dec 31, 2012 7:25 pm
LED backlit wall signs
Here are a few of the signs I have finished the larger ones cut out of .080 aluminum and the smaller ones out of 14g steel all of them are backlit with RGB LED's with remote control.... see more on my facebook page-HD Chassis, or hdchassis.com Thanks..
- Attachments
-
- signs 2.jpg (13.82 KiB) Viewed 2449 times
-
- signs 1.jpg (13.9 KiB) Viewed 2449 times
- TAP
- 2.5 Star Member
- Posts: 131
- Joined: Fri May 03, 2013 9:47 pm
- Location: ND-The Rich Bottom Of Lake Agassiz
Re: LED backlit wall signs
jmod60, GREAT, that is some excellent looking work,
Tim
Tim
-
- 2 Star Member
- Posts: 95
- Joined: Thu Nov 17, 2011 9:21 pm
Re: LED backlit wall signs
Very nice
How about some more info on the Led lights. Where to get them how you mounted them ect
retiredcpo
How about some more info on the Led lights. Where to get them how you mounted them ect
retiredcpo
-
- 1 Star Member
- Posts: 11
- Joined: Mon Dec 31, 2012 7:25 pm
Re: LED backlit wall signs
I buy them from either oznium or I have purchased them from eBay (just be sure of what you are getting) they come in 5m rolls with 3m adhesive on the back and I also glue all the edges down (after soldering all connections) to be sure they stay in place...
- conz35
- 1.5 Star Member
- Posts: 48
- Joined: Mon Jan 07, 2013 4:54 pm
- Location: Yuma, Az and Davenport, Wa
- Contact:
Re: LED backlit wall signs
those look sweet! Good work, just curious what are you paying for a 5m roll with the power/ control box?
"Knowledge is knowing that a tomato is a fruit, but Wisdom is knowing not to put it in a fruit salad."
-
- 1.5 Star Member
- Posts: 47
- Joined: Wed Sep 11, 2013 1:57 pm
- Location: SW Arkansas
Re: LED backlit wall signs
Great work! Diggin the LEDs.
4x8 modified Eagle Plasma
DoubleCad XT2
SheetCam/Mach3
Hypertherm Pmax 1000
https://www.facebook.com/RedJetMetalWorks
DoubleCad XT2
SheetCam/Mach3
Hypertherm Pmax 1000
https://www.facebook.com/RedJetMetalWorks